- Processing Talk
- Compare
- K70 Max vs TTC-H40
Ikier K70 Max vs Two Trees TTC-H40
What K70 Max does better (2) and where TTC-H40 wins (3) — every spec side by side.
Why is K70 Max better than TTC-H40?
- Max engraving / travel speed600 mm/s vs 30 mm/s20×
- Positioning accuracy0.01 mm vs 0.05 mm5×
Why is TTC-H40 better than K70 Max?
- Work area (surface)6,800 cm² vs 10,000 cm²+47%
- Work area depth (Y)800 mm vs 1,000 mm+25%
- Work area width (X)850 mm vs 1,000 mm+18%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | — |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | — |
| Wavelength | 455 nm | — |
| Frame material | Steel | Aluminium |
| Laser power | ||
| Laser output power | 77 W | — |
| Work area | ||
| Work area | 850 × 800 mm | 1000 × 1000 mm |
| Work area width (X) | 850 mm | 1,000 mm |
| Work area depth (Y) | 800 mm | 1,000 mm |
| Work area (surface) | 6,800 cm² | 10,000 cm² |
| Z travel | — | 100 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 30 mm/s |
| Max cutting depth – acrylic | 25 mm | — |
| Precision | ||
| Laser spot size | 0.2 mm | — |
| Positioning accuracy | 0.01 mm | 0.05 mm |
| Closed-loop motors / servos | — | No |
| Linear rails | Yes | Yes |
| Ball screws | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | — |
| Emergency stop button | — | Yes |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | Yes | — |
| Built-in camera | No | — |
| Autofocus / auto height | Yes | — |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Laser module option (CNC) | — | Yes |
| Automatic tool changer | — | No |
| Tool length / Z probe | — | No |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | Yes | Yes |
| Compatible software | LightBurn, LaserGRBL | Easel, Fusion 360, Vectric VCarve |
| LightBurn compatible | Yes | — |
| Controller / firmware | — | GRBL |
| File formats | PNG, JPG, BMP, GIF, DXF, SVG | — |
| CNC milling | ||
| Spindle power | — | 3,000 W |
| Max spindle speed | — | 30,000 rpm |
| Size & power | ||
| Width | — | 1,292 mm |
| Depth | — | 1,290 mm |
| Height | — | 404 mm |
| Weight | — | 38.3 kg |
| Rated power consumption | 360 W | — |
| Input voltage | 100–240 V | — |
