- Processing Talk
- Compare
- A10 Pro V2 vs K70 Max
AtomStack A10 Pro V2 vs Ikier K70 Max
What A10 Pro V2 does better (1) and where K70 Max wins (9) — every spec side by side.
vs
6.3Power & cutting9.6
6.1Speed8.0
5.5Precision3.8
7.1Work area9.7
6.4Safety6.4
4.0Features & ease of use8.9
Why is A10 Pro V2 better than K70 Max?
- Laser spot size0.08 mm vs 0.2 mm2.5×
Why is K70 Max better than A10 Pro V2?
- Laser output power10 W vs 77 W7.7×
- Work area (surface)1,558 cm² vs 6,800 cm²4.4×
- Max cutting depth – acrylic10 mm vs 25 mm2.5×
- Max engraving / travel speed400 mm/s vs 600 mm/s+50%
- Positioning accuracy0.02 mm vs 0.01 mm2×
- Air assistNo · A10 Pro V2: Yes
- Autofocus / auto heightNo · A10 Pro V2: Yes
- Work area depth (Y)380 mm vs 800 mm2.1×
- Work area width (X)410 mm vs 850 mm2.1×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | 455 nm |
| Frame material | — | Steel |
| Laser power | ||
| Laser output power | 10 W | 77 W |
| Work area | ||
| Work area | 410 × 380 mm | 850 × 800 mm |
| Work area width (X) | 410 mm | 850 mm |
| Work area depth (Y) | 380 mm | 800 mm |
| Work area (surface) | 1,558 cm² | 6,800 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | 12 mm | — |
| Max cutting depth – acrylic | 10 mm | 25 mm |
| Precision | ||
| Laser spot size | 0.08 mm | 0.2 mm |
| Positioning accuracy | 0.02 mm | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | Yes |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, SVG, PNG, BMP, PDF, G-code, DXF | PNG, JPG, BMP, GIF, DXF, SVG |
| Size & power | ||
| Width | 178 mm | — |
| Depth | 254 mm | — |
| Height | 178 mm | — |
| Weight | 6 kg | — |
| Rated power consumption | 50 W | 360 W |
| Input voltage | — | 100–240 V |
