- Processing Talk
- Compare
- X70 Max vs K1 Pro Max 70W
AtomStack X70 Max vs Ikier K1 Pro Max 70W
What X70 Max does better (5) and where K1 Pro Max 70W wins (1) — every spec side by side.
vs
9.6Power & cutting9.6
6.1Speed9.4
3.7Precision3.8
9.7Work area8.5
6.4Safety6.7
8.4Features & ease of use7.9
Dimensions
Size comparison
X70 MaxK1 Pro Max 70W
| X70 Max | K1 Pro Max 70W | Difference | |
|---|---|---|---|
| Height | 230 mm | 153 mm | +77 mm |
| Width | 1,056 mm | 780 mm | +276 mm |
| Depth | 1,168 mm | 500 mm | +668 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is X70 Max better than K1 Pro Max 70W?
- Work area (surface)6,800 cm² vs 1,681 cm²4×
- Laser output power77 W vs 70 W+10%
- Laser spot size0.18 mm vs 0.2 mm+11%
- Work area depth (Y)850 mm vs 410 mm2.1×
- Work area width (X)800 mm vs 410 mm+95%
Why is K1 Pro Max 70W better than X70 Max?
- Max engraving / travel speed400 mm/s vs 900 mm/s2.2×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 77 W | 70 W |
| Work area | ||
| Work area | 800 × 850 mm | 410 × 410 mm |
| Work area width (X) | 800 mm | 410 mm |
| Work area depth (Y) | 850 mm | 410 mm |
| Work area (surface) | 6,800 cm² | 1,681 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 900 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 30 mm |
| Max cutting depth – acrylic | 25 mm | — |
| Precision | ||
| Laser spot size | 0.18 mm | 0.2 mm |
| Positioning accuracy | 0.01 mm | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | Yes | Yes |
| Connectivity & software | ||
| Connections | USB | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | 1,056 mm | 780 mm |
| Depth | 1,168 mm | 500 mm |
| Height | 230 mm | 153 mm |
| Weight | — | 12 kg |
| Rated power consumption | 360 W | — |
| Input voltage | 100–240 V | 100–240 V |
