- Processing Talk
- Compare
- X70 Max vs Vision Pro 45W
AtomStack X70 Max vs WeCreat Vision Pro 45W
What X70 Max does better (5) and where Vision Pro 45W wins (2) — every spec side by side.
vs
9.7Power & cutting9.2
3.6Precision3.6
6.3Safety8.8
8.3Features & ease of use2.3
Dimensions
Size comparison
X70 MaxVision Pro 45W
| X70 Max | Vision Pro 45W | Difference | |
|---|---|---|---|
| Height | 230 mm | 253 mm | −23 mm |
| Width | 1,056 mm | 680 mm | +376 mm |
| Depth | 1,168 mm | 530 mm | +638 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is X70 Max better than Vision Pro 45W?
- Laser output power77 W vs 45 W+71%
- Positioning accuracy0.01 mm vs 0.08 mm8×
- Air assistYes · Vision Pro 45W: No
- Autofocus / auto heightYes · Vision Pro 45W: No
- Wi-FiYes · Vision Pro 45W: No
Why is Vision Pro 45W better than X70 Max?
- Enclosed (fully covered)No · X70 Max: Yes
- Laser spot size0.18 mm vs 0.1 mm+80%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 77 W | 45 W |
| Work area | ||
| Work area | 800 × 850 mm | — |
| Work area width (X) | 800 mm | — |
| Work area depth (Y) | 850 mm | — |
| Work area (surface) | 6,800 cm² | — |
| Pass-through slot | — | Yes |
| Conveyor / roll feeder support | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | — |
| Max cutting depth – acrylic | 25 mm | — |
| Precision | ||
| Laser spot size | 0.18 mm | 0.1 mm |
| Positioning accuracy | 0.01 mm | 0.08 mm |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Laser safety class | — | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | Yes | Yes |
| Emergency stop button | — | Yes |
| Built-in fume filter / purifier | — | Yes |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | USB | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | WeCreat MakeIt |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Width | 1,056 mm | 680 mm |
| Depth | 1,168 mm | 530 mm |
| Height | 230 mm | 253 mm |
| Rated power consumption | 360 W | — |
| Input voltage | 100–240 V | — |









