- Processing Talk
- Compare
- TTC6050 vs TTS-20 Pro 20W
Two Trees TTC6050 vs Two Trees TTS-20 Pro 20W
What TTC6050 does better (3) and where TTS-20 Pro 20W wins (2) — every spec side by side.
vs
5.9Power & cutting7.7
7.0Speed6.9
5.8Precision3.6
7.8Work area8.8
6.5Safety3.2
5.2Features & ease of use4.8
Dimensions
Size comparison
TTC6050TTS-20 Pro 20W
| TTC6050 | TTS-20 Pro 20W | Difference | |
|---|---|---|---|
| Height | 530 mm | 125 mm | +405 mm |
| Width | 811 mm | 695 mm | +116 mm |
| Depth | 769 mm | 595 mm | +174 mm |
| Weight | 35.9 kg | 3.2 kg | +32.7 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is TTC6050 better than TTS-20 Pro 20W?
- Work area (surface)3,000 cm² vs 1,747 cm²+72%
- Work area width (X)600 mm vs 418 mm+44%
- Work area depth (Y)500 mm vs 418 mm+20%
Why is TTS-20 Pro 20W better than TTC6050?
- Max engraving / travel speed83 mm/s vs 500 mm/s6×
- Weight35.9 kg vs 3.2 kg11.2×
Specifications
Side by side
| General | ||
| Laser sources | — | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | — | No |
| Wavelength | — | 450 nm |
| Frame material | Aluminium | Aluminium |
| Laser power | ||
| Laser output power | — | 20 W |
| Work area | ||
| Work area | 600 × 500 mm | 418 × 418 mm |
| Work area width (X) | 600 mm | 418 mm |
| Work area depth (Y) | 500 mm | 418 mm |
| Work area (surface) | 3,000 cm² | 1,747 cm² |
| Z travel | 100 mm | — |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 83 mm/s | 500 mm/s |
| Precision | ||
| Positioning accuracy | — | 0.05 mm |
| Closed-loop motors / servos | No | — |
| Linear rails | Yes | — |
| Ball screws | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | — | No |
| Emergency stop button | Yes | — |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | — | No |
| Autofocus / auto height | — | No |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | Yes | — |
| Laser module option (CNC) | Yes | — |
| Automatic tool changer | No | — |
| Tool length / Z probe | No | — |
| Connectivity & software | ||
| Connections | USB | USB, SD / USB drive |
| Wi-Fi | — | No |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Phone app control | — | Yes |
| Compatible software | Easel, Fusion 360, Vectric VCarve | LightBurn, LaserGRBL |
| LightBurn compatible | — | Yes |
| Controller / firmware | GRBL | — |
| File formats | NC, G-code | NC, BMP, JPG, PNG, G-code |
| CNC milling | ||
| Spindle power | 500 W | — |
| Max spindle speed | 12,000 rpm | — |
| Size & power | ||
| Width | 811 mm | 695 mm |
| Depth | 769 mm | 595 mm |
| Height | 530 mm | 125 mm |
| Weight | 35.9 kg | 3.2 kg |
