- Processing Talk
- Compare
- ED1 vs F1 Ultra 20W
Two Trees ED1 vs xTool F1 Ultra 20W
What ED1 does better (2) and where F1 Ultra 20W wins (3) — every spec side by side.
vs
6.5Power & cutting2.7
4.8Speed4.9
9.5Precision9.7
5.4Work area8.2
8.9Safety8.8
9.7Features & ease of use8.8
Dimensions
Size comparison
ED1F1 Ultra 20W
| ED1 | F1 Ultra 20W | Difference | |
|---|---|---|---|
| Height | 525 mm | 492 mm | +33 mm |
| Width | 630 mm | 273 mm | +357 mm |
| Depth | 510 mm | 373 mm | +137 mm |
| Weight | 38 kg | 14.7 kg | +23.3 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is ED1 better than F1 Ultra 20W?
- Work area (surface)600 cm² vs 484 cm²+24%
- Work area width (X)300 mm vs 220 mm+36%
Why is F1 Ultra 20W better than ED1?
- Max engraving / travel speed50 mm/s vs 10,000 mm/s200×
- Weight38 kg vs 14.7 kg2.6×
- Work area depth (Y)200 mm vs 220 mm+10%
Specifications
Side by side
| General | ||
| Laser sources | — | Fibre (1064 nm), Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Galvo (scanning mirrors) |
| Two laser sources | — | Yes |
| Frame material | Aluminium | — |
| Laser power | ||
| Laser output power | — | 20 W |
| Work area | ||
| Work area | 300 × 200 mm | 220 × 220 mm |
| Work area width (X) | 300 mm | 220 mm |
| Work area depth (Y) | 200 mm | 220 mm |
| Work area (surface) | 600 cm² | 484 cm² |
| Z travel | 120 mm | — |
| Conveyor / roll feeder support | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 50 mm/s | 10,000 mm/s |
| Precision | ||
| Laser spot size | — | 0.03 mm |
| Positioning accuracy | 0.01 mm | — |
| Closed-loop motors / servos | No | — |
| Linear rails | Yes | — |
| Ball screws | Yes | — |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Flame / fire detection | — | Yes |
| Lid interlock | Yes | — |
| Built-in fume filter / purifier | — | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Autofocus / auto height | — | Yes |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Laser module option (CNC) | Yes | — |
| Automatic tool changer | Yes | — |
| Tool length / Z probe | Yes | — |
| Connectivity & software | ||
| Connections | Wi-Fi | USB, Wi-Fi |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Compatible software | Easel, Fusion 360 | LightBurn, xTool Creative Space |
| LightBurn compatible | — | Yes |
| Controller / firmware | GRBL | — |
| File formats | NC, G-code | SVG, DXF, PNG, JPG, BMP |
| CNC milling | ||
| Spindle power | 600 W | — |
| Max spindle speed | 18,000 rpm | — |
| Size & power | ||
| Width | 630 mm | 273 mm |
| Depth | 510 mm | 373 mm |
| Height | 525 mm | 492 mm |
| Weight | 38 kg | 14.7 kg |
| Rated power consumption | 240 W | — |
| Input voltage | 200–240 V | — |
