- Processing Talk
- Compare
- ED1 vs Lumos Flex 15W
Two Trees ED1 vs WeCreat Lumos Flex 15W
What ED1 does better (4) and where Lumos Flex 15W wins (2) — every spec side by side.
vs
6.5Power & cutting2.0
4.8Speed4.9
9.5Precision2.1
5.4Work area4.0
8.9Safety8.6
9.7Features & ease of use9.8
Dimensions
Size comparison
ED1Lumos Flex 15W
| ED1 | Lumos Flex 15W | Difference | |
|---|---|---|---|
| Height | 525 mm | 350 mm | +175 mm |
| Width | 630 mm | 242 mm | +388 mm |
| Depth | 510 mm | 268 mm | +242 mm |
| Weight | 38 kg | 3.1 kg | +34.9 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is ED1 better than Lumos Flex 15W?
- Work area (surface)600 cm² vs 135 cm²4.4×
- Positioning accuracy0.01 mm vs 0.1 mm10×
- Work area width (X)300 mm vs 116 mm2.6×
- Work area depth (Y)200 mm vs 116 mm+72%
Why is Lumos Flex 15W better than ED1?
- Max engraving / travel speed50 mm/s vs 10,000 mm/s200×
- Weight38 kg vs 3.1 kg12.3×
Specifications
Side by side
| General | ||
| Laser sources | — | Fibre (1064 nm), Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Galvo (scanning mirrors) |
| Two laser sources | — | Yes |
| Frame material | Aluminium | — |
| Laser power | ||
| Laser output power | — | 15 W |
| Work area | ||
| Work area | 300 × 200 mm | 116 × 116 mm |
| Work area width (X) | 300 mm | 116 mm |
| Work area depth (Y) | 200 mm | 116 mm |
| Work area (surface) | 600 cm² | 135 cm² |
| Max workpiece height | — | 100 mm |
| Z travel | 120 mm | — |
| Speed & cutting | ||
| Max engraving / travel speed | 50 mm/s | 10,000 mm/s |
| Precision | ||
| Laser spot size | — | 0.1 mm |
| Positioning accuracy | 0.01 mm | 0.1 mm |
| Closed-loop motors / servos | No | — |
| Linear rails | Yes | — |
| Ball screws | Yes | — |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Emergency stop button | — | Yes |
| Lid interlock | Yes | — |
| Features | ||
| Built-in camera | Yes | Yes |
| Autofocus / auto height | — | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Laser module option (CNC) | Yes | — |
| Automatic tool changer | Yes | — |
| Tool length / Z probe | Yes | — |
| Connectivity & software | ||
| Connections | Wi-Fi | — |
| Wi-Fi | Yes | — |
| USB | Yes | — |
| SD / TF card | Yes | — |
| Compatible software | Easel, Fusion 360 | — |
| Controller / firmware | GRBL | — |
| File formats | NC, G-code | — |
| CNC milling | ||
| Spindle power | 600 W | — |
| Max spindle speed | 18,000 rpm | — |
| Size & power | ||
| Width | 630 mm | 242 mm |
| Depth | 510 mm | 268 mm |
| Height | 525 mm | 350 mm |
| Weight | 38 kg | 3.1 kg |
| Rated power consumption | 240 W | 168 W |
| Input voltage | 200–240 V | 100–240 V |
