- Processing Talk
- Compare
- ED1 vs TTC-H40
Two Trees ED1 vs Two Trees TTC-H40
What ED1 does better (6) and where TTC-H40 wins (5) — every spec side by side.
Dimensions
Size comparison
ED1TTC-H40
| ED1 | TTC-H40 | Difference | |
|---|---|---|---|
| Height | 525 mm | 404 mm | +121 mm |
| Width | 630 mm | 1,292 mm | −662 mm |
| Depth | 510 mm | 1,290 mm | −780 mm |
| Weight | 38 kg | 38.3 kg | −0.3 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is ED1 better than TTC-H40?
- Enclosed (fully covered)Yes · TTC-H40: No
- Positioning accuracy0.01 mm vs 0.05 mm5×
- Max engraving / travel speed50 mm/s vs 30 mm/s+67%
- Automatic tool changerYes · TTC-H40: No
- Tool length / Z probeYes · TTC-H40: No
- Z travel120 mm vs 100 mm+20%
Why is TTC-H40 better than ED1?
- Work area (surface)600 cm² vs 10,000 cm²16.7×
- Spindle power600 W vs 3,000 W5×
- Work area width (X)300 mm vs 1,000 mm3.3×
- Work area depth (Y)200 mm vs 1,000 mm5×
- Max spindle speed18,000 rpm vs 30,000 rpm+67%
Specifications
Side by side
| General | ||
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Frame material | Aluminium | Aluminium |
| Work area | ||
| Work area | 300 × 200 mm | 1000 × 1000 mm |
| Work area width (X) | 300 mm | 1,000 mm |
| Work area depth (Y) | 200 mm | 1,000 mm |
| Work area (surface) | 600 cm² | 10,000 cm² |
| Z travel | 120 mm | 100 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 50 mm/s | 30 mm/s |
| Precision | ||
| Positioning accuracy | 0.01 mm | 0.05 mm |
| Closed-loop motors / servos | No | No |
| Linear rails | Yes | Yes |
| Ball screws | Yes | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Emergency stop button | — | Yes |
| Lid interlock | Yes | — |
| Features | ||
| Built-in camera | Yes | — |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Laser module option (CNC) | Yes | Yes |
| Automatic tool changer | Yes | No |
| Tool length / Z probe | Yes | No |
| Connectivity & software | ||
| Connections | Wi-Fi | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | Yes | Yes |
| Compatible software | Easel, Fusion 360 | Easel, Fusion 360, Vectric VCarve |
| Controller / firmware | GRBL | GRBL |
| File formats | NC, G-code | — |
| CNC milling | ||
| Spindle power | 600 W | 3,000 W |
| Max spindle speed | 18,000 rpm | 30,000 rpm |
| Size & power | ||
| Width | 630 mm | 1,292 mm |
| Depth | 510 mm | 1,290 mm |
| Height | 525 mm | 404 mm |
| Weight | 38 kg | 38.3 kg |
| Rated power consumption | 240 W | — |
| Input voltage | 200–240 V | — |
