- Processing Talk
- Compare
- LM3 40W vs D1 Pro 2.0 10W
Ortur LM3 40W vs xTool D1 Pro 2.0 10W
What LM3 40W does better (1) and where D1 Pro 2.0 10W wins (3) — every spec side by side.
vs
9.0Power & cutting4.9
6.2Precision6.2
6.4Work area8.1
Why is LM3 40W better than D1 Pro 2.0 10W?
- Laser output power40 W vs 10 W4×
Why is D1 Pro 2.0 10W better than LM3 40W?
- Work area (surface)1,420 cm² vs 1,720 cm²+21%
- Work area depth (Y)355 mm vs 400 mm+13%
- Work area width (X)400 mm vs 430 mm+7%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | — |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 40 W | 10 W |
| Work area | ||
| Work area | 400 × 355 mm | 430 × 400 mm |
| Work area width (X) | 400 mm | 430 mm |
| Work area depth (Y) | 355 mm | 400 mm |
| Work area (surface) | 1,420 cm² | 1,720 cm² |
| Max workpiece height | — | 51 mm |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | — | 400 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 10 mm |
| Precision | ||
| Laser spot size | 0.08 mm | 0.08 mm |
| Safety | ||
| Enclosed (fully covered) | No | — |
| Flame / fire detection | No | — |
| Built-in fume filter / purifier | Yes | — |
| Features | ||
| Air assist | Yes | — |
| Built-in camera | No | — |
| Autofocus / auto height | No | — |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, Ethernet, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| Ethernet (LAN) | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, xTool Creative Space |
| LightBurn compatible | Yes | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP |
| Size & power | ||
| Width | — | 600 mm |
| Depth | — | 590 mm |
| Height | — | 150 mm |
| Weight | — | 5.5 kg |
| Rated power consumption | — | 60 W |
