- Processing Talk
- Compare
- K70 Max vs TTS-55 Pro
Ikier K70 Max vs Two Trees TTS-55 Pro
What K70 Max does better (8) and where TTS-55 Pro wins (1) — every spec side by side.
vs
9.6Power & cutting3.8
8.0Speed6.9
3.8Precision5.2
9.7Work area4.8
6.4Safety3.2
8.9Features & ease of use6.4
Why is K70 Max better than TTS-55 Pro?
- Laser output power77 W vs 5.5 W14×
- Work area (surface)6,800 cm² vs 900 cm²7.6×
- Positioning accuracy0.01 mm vs 0.08 mm8×
- Autofocus / auto heightYes · TTS-55 Pro: No
- Max engraving / travel speed600 mm/s vs 500 mm/s+20%
- Work area width (X)850 mm vs 300 mm2.8×
- Work area depth (Y)800 mm vs 300 mm2.7×
- Flame / fire detectionYes · TTS-55 Pro: No
Why is TTS-55 Pro better than K70 Max?
- Laser spot size0.2 mm vs 0.08 mm2.5×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Frame material | Steel | — |
| Laser power | ||
| Laser output power | 77 W | 5.5 W |
| Work area | ||
| Work area | 850 × 800 mm | 300 × 300 mm |
| Work area width (X) | 850 mm | 300 mm |
| Work area depth (Y) | 800 mm | 300 mm |
| Work area (surface) | 6,800 cm² | 900 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 500 mm/s |
| Max cutting depth – acrylic | 25 mm | — |
| Precision | ||
| Laser spot size | 0.2 mm | 0.08 mm |
| Positioning accuracy | 0.01 mm | 0.08 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | No |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Rotary attachment support | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | — |
| SD / TF card | Yes | Yes |
| Phone app control | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | PNG, JPG, BMP, GIF, DXF, SVG | — |
| Size & power | ||
| Width | — | 570 mm |
| Depth | — | 510 mm |
| Height | — | 150 mm |
| Weight | — | 3.2 kg |
| Rated power consumption | 360 W | — |
| Input voltage | 100–240 V | — |
