- Processing Talk
- Compare
- K70 Max vs H10 10W
Ikier K70 Max vs Ortur H10 10W
What K70 Max does better (9) and where H10 10W wins (1) — every spec side by side.
Why is K70 Max better than H10 10W?
- Laser output power77 W vs 10 W7.7×
- Work area (surface)6,800 cm² vs 1,600 cm²4.2×
- Max engraving / travel speed600 mm/s vs 333 mm/s+80%
- Max cutting depth – acrylic25 mm vs 8 mm3.1×
- Autofocus / auto heightYes · H10 10W: No
- Work area width (X)850 mm vs 400 mm2.1×
- Work area depth (Y)800 mm vs 400 mm2×
- Flame / fire detectionYes · H10 10W: No
- Wi-FiYes · H10 10W: No
Why is H10 10W better than K70 Max?
- Laser spot size0.2 mm vs 0.08 mm2.5×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | 450 nm |
| Frame material | Steel | — |
| Laser power | ||
| Laser output power | 77 W | 10 W |
| Work area | ||
| Work area | 850 × 800 mm | 400 × 400 mm |
| Work area width (X) | 850 mm | 400 mm |
| Work area depth (Y) | 800 mm | 400 mm |
| Work area (surface) | 6,800 cm² | 1,600 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 333 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 12 mm |
| Max cutting depth – acrylic | 25 mm | 8 mm |
| Precision | ||
| Laser spot size | 0.2 mm | 0.08 mm |
| Positioning accuracy | 0.01 mm | 0.01 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | No |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Built-in fume filter / purifier | — | Yes |
| Laser shield / filter cover | Yes | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Phone app control | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | PNG, JPG, BMP, GIF, DXF, SVG | — |
| Size & power | ||
| Rated power consumption | 360 W | — |
| Input voltage | 100–240 V | — |
