- Processing Talk
- Compare
- K70 Max vs Pro 2440 80W
Ikier K70 Max vs OMTech Pro 2440 80W
What K70 Max does better (2) and where Pro 2440 80W wins (5) — every spec side by side.
vs
9.6Power & cutting7.8
8.0Speed9.0
9.7Work area8.8
6.4Safety4.7
8.9Features & ease of use6.6
Why is K70 Max better than Pro 2440 80W?
- Work area (surface)6,800 cm² vs 6,000 cm²+13%
- Work area width (X)850 mm vs 600 mm+42%
Why is Pro 2440 80W better than K70 Max?
- Max engraving / travel speed600 mm/s vs 1,200 mm/s2×
- Enclosed (fully covered)No · K70 Max: Yes
- Laser output power77 W vs 80 W+4%
- Max cutting depth – acrylic25 mm vs 29 mm+16%
- Work area depth (Y)800 mm vs 1,000 mm+25%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Frame material | Steel | — |
| Laser power | ||
| Laser output power | 77 W | 80 W |
| Work area | ||
| Work area | 850 × 800 mm | 600 × 1000 mm |
| Work area width (X) | 850 mm | 600 mm |
| Work area depth (Y) | 800 mm | 1,000 mm |
| Work area (surface) | 6,800 cm² | 6,000 cm² |
| Pass-through slot | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 1,200 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 30 mm |
| Max cutting depth – acrylic | 25 mm | 29 mm |
| Precision | ||
| Laser spot size | 0.2 mm | — |
| Positioning accuracy | 0.01 mm | — |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Flame / fire detection | Yes | — |
| Emergency stop button | — | Yes |
| Exhaust fan | — | Yes |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi, Ethernet |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | — | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, RDWorks |
| LightBurn compatible | Yes | Yes |
| File formats | PNG, JPG, BMP, GIF, DXF, SVG | — |
| Size & power | ||
| Width | — | 1,565 mm |
| Depth | — | 1,379 mm |
| Height | — | 1,039 mm |
| Weight | — | 440 kg |
| Rated power consumption | 360 W | 100 W |
| Input voltage | 100–240 V | — |
