- Processing Talk
- Compare
- K1 Pro Fiber 20W vs Integrated 30W
Ikier K1 Pro Fiber 20W vs OMTech Integrated 30W
What K1 Pro Fiber 20W does better (5) and where Integrated 30W wins (2) — every spec side by side.
vs
2.7Power & cutting4.0
2.2Speed7.6
6.5Precision3.6
9.7Work area5.1
8.1Safety7.3
7.8Features & ease of use3.2
Dimensions
Size comparison
K1 Pro Fiber 20WIntegrated 30W
| K1 Pro Fiber 20W | Integrated 30W | Difference | |
|---|---|---|---|
| Height | 222 mm | 550 mm | −328 mm |
| Width | 650 mm | 400 mm | +250 mm |
| Depth | 750 mm | 340 mm | +410 mm |
| Weight | 12 kg | 16.5 kg | −4.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is K1 Pro Fiber 20W better than Integrated 30W?
- Work area (surface)1,681 cm² vs 225 cm²7.5×
- Autofocus / auto heightYes · Integrated 30W: No
- Work area width (X)410 mm vs 150 mm2.7×
- Work area depth (Y)410 mm vs 150 mm2.7×
- Weight12 kg vs 16.5 kg+38%
Why is Integrated 30W better than K1 Pro Fiber 20W?
- Max engraving / travel speed800 mm/s vs 10,008 mm/s12.5×
- Laser output power20 W vs 30 W+50%
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| Wavelength | 1,064 nm | 1,064 nm |
| Frame material | — | Aluminium |
| Laser power | ||
| Laser output power | 20 W | 30 W |
| Work area | ||
| Work area | 410 × 410 mm | 150 × 150 mm |
| Work area width (X) | 410 mm | 150 mm |
| Work area depth (Y) | 410 mm | 150 mm |
| Work area (surface) | 1,681 cm² | 225 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 800 mm/s | 10,008 mm/s |
| Precision | ||
| Laser spot size | 0.08 mm | — |
| Positioning accuracy | 0.01 mm | 0.01 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | — |
| Tilt / movement sensor | Yes | — |
| Built-in fume filter / purifier | — | Yes |
| Features | ||
| Air assist | Yes | — |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | USB | USB |
| Wi-Fi | Yes | — |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | SVG, DXF, JPG, PNG, BMP, TIF | BMP, GIF, JPG, DXF, DST, AI |
| Size & power | ||
| Width | 650 mm | 400 mm |
| Depth | 750 mm | 340 mm |
| Height | 222 mm | 550 mm |
| Weight | 12 kg | 16.5 kg |
| Rated power consumption | — | 50 W |
| Input voltage | 100–240 V | — |
