- Processing Talk
- Compare
- Z5-1 vs K1 Pro Fiber 20W
Genmitsu Z5-1 vs Ikier K1 Pro Fiber 20W
What Z5-1 does better (1) and where K1 Pro Fiber 20W wins (0) — every spec side by side.
vs
4.9Speed2.2
Why is Z5-1 better than K1 Pro Fiber 20W?
- Max engraving / travel speed10,000 mm/s vs 800 mm/s12.5×
Why is K1 Pro Fiber 20W better than Z5-1?
K1 Pro Fiber 20W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | — | 20 W |
| Work area | ||
| Work area | — | 410 × 410 mm |
| Work area width (X) | — | 410 mm |
| Work area depth (Y) | — | 410 mm |
| Work area (surface) | — | 1,681 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | 800 mm/s |
| Precision | ||
| Laser spot size | — | 0.08 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | — | No |
| Flame / fire detection | — | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | — | No |
| Autofocus / auto height | — | Yes |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | — | 650 mm |
| Depth | — | 750 mm |
| Height | — | 222 mm |
| Weight | — | 12 kg |
| Input voltage | — | 100–240 V |
