- Processing Talk
- Compare
- X70 Max vs H20 40W
AtomStack X70 Max vs Ortur H20 40W
What X70 Max does better (6) and where H20 40W wins (3) — every spec side by side.
Why is X70 Max better than H20 40W?
- Work area (surface)6,800 cm² vs 1,260 cm²5.4×
- Laser output power77 W vs 40 W+92%
- Max engraving / travel speed400 mm/s vs 333 mm/s+20%
- Work area depth (Y)850 mm vs 300 mm2.8×
- Flame / fire detectionYes · H20 40W: No
- Work area width (X)800 mm vs 420 mm+90%
Why is H20 40W better than X70 Max?
- Enclosed (fully covered)No · X70 Max: Yes
- Built-in cameraNo · X70 Max: Yes
- Two laser sourcesNo · X70 Max: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm), Infrared diode (1064 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | Yes |
| Wavelength | — | 1,064 nm |
| Frame material | — | Aluminium |
| Laser power | ||
| Laser output power | 77 W | 40 W |
| Second laser output power | — | 2 W |
| Work area | ||
| Work area | 800 × 850 mm | 420 × 300 mm |
| Work area width (X) | 800 mm | 420 mm |
| Work area depth (Y) | 850 mm | 300 mm |
| Work area (surface) | 6,800 cm² | 1,260 cm² |
| Max workpiece height | — | 98 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 333 mm/s |
| Max cutting depth – acrylic | 25 mm | — |
| Precision | ||
| Laser spot size | 0.18 mm | — |
| Positioning accuracy | 0.01 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Laser safety class | — | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | Yes | No |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | — | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | Yes |
| Autofocus / auto height | Yes | Yes |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | USB | USB, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 1,056 mm | — |
| Depth | 1,168 mm | — |
| Height | 230 mm | — |
| Rated power consumption | 360 W | — |
| Input voltage | 100–240 V | — |
