- Processing Talk
- Compare
- X70 Max vs MCORE 400W
AtomStack X70 Max vs Gweike MCORE 400W
What X70 Max does better (5) and where MCORE 400W wins (3) — every spec side by side.
vs
6.1Speed2.3
3.7Precision5.1
9.7Work area8.8
6.4Safety7.9
8.4Features & ease of use8.2
Dimensions
Size comparison
X70 MaxMCORE 400W
| X70 Max | MCORE 400W | Difference | |
|---|---|---|---|
| Height | 230 mm | 582 mm | −352 mm |
| Width | 1,056 mm | 1,280 mm | −224 mm |
| Depth | 1,168 mm | 800 mm | +368 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is X70 Max better than MCORE 400W?
- Work area (surface)6,800 cm² vs 2,922 cm²2.3×
- Autofocus / auto heightYes · MCORE 400W: No
- Max cutting depth – acrylic25 mm vs 20.1 mm+24%
- Work area depth (Y)850 mm vs 411 mm2.1×
- Work area width (X)800 mm vs 711 mm+13%
Why is MCORE 400W better than X70 Max?
- Max engraving / travel speed400 mm/s vs 1,200 mm/s3×
- Built-in cameraNo · X70 Max: Yes
- Two laser sourcesNo · X70 Max: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Fibre (1064 nm), CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Galvo (scanning mirrors) |
| Two laser sources | No | Yes |
| Laser power | ||
| Laser output power | 77 W | — |
| Work area | ||
| Work area | 800 × 850 mm | 711 × 411 mm |
| Work area width (X) | 800 mm | 711 mm |
| Work area depth (Y) | 850 mm | 411 mm |
| Work area (surface) | 6,800 cm² | 2,922 cm² |
| Max workpiece height | — | 102 mm |
| Conveyor / roll feeder support | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 1,200 mm/s |
| Max cutting depth – acrylic | 25 mm | 20.1 mm |
| Precision | ||
| Laser spot size | 0.18 mm | — |
| Positioning accuracy | 0.01 mm | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | — |
| Emergency stop button | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | Yes |
| Autofocus / auto height | Yes | No |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | USB | Ethernet |
| Wi-Fi | Yes | — |
| USB | Yes | — |
| Ethernet (LAN) | — | Yes |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | WeCreat MakeIt |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Width | 1,056 mm | 1,280 mm |
| Depth | 1,168 mm | 800 mm |
| Height | 230 mm | 582 mm |
| Weight | — | 130 kg |
| Rated power consumption | 360 W | — |
| Input voltage | 100–240 V | — |
