- Processing Talk
- Compare
- PM 30W vs K1 Pro Fiber 20W
Acmer PM 30W vs Ikier K1 Pro Fiber 20W
What PM 30W does better (2) and where K1 Pro Fiber 20W wins (4) — every spec side by side.
vs
4.0Power & cutting2.7
4.9Speed2.2
7.8Work area9.7
4.7Safety8.1
5.6Features & ease of use7.8
Dimensions
Size comparison
PM 30WK1 Pro Fiber 20W
| PM 30W | K1 Pro Fiber 20W | Difference | |
|---|---|---|---|
| Height | 610 mm | 222 mm | +388 mm |
| Width | 470 mm | 650 mm | −180 mm |
| Depth | 350 mm | 750 mm | −400 mm |
| Weight | 23 kg | 12 kg | +11 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is PM 30W better than K1 Pro Fiber 20W?
- Max engraving / travel speed10,000 mm/s vs 800 mm/s12.5×
- Laser output power30 W vs 20 W+50%
Why is K1 Pro Fiber 20W better than PM 30W?
- Work area (surface)400 cm² vs 1,681 cm²4.2×
- Work area width (X)200 mm vs 410 mm2×
- Work area depth (Y)200 mm vs 410 mm2×
- Weight23 kg vs 12 kg+92%
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| MOPA fibre source (adjustable pulse) | Yes | — |
| Wavelength | — | 1,064 nm |
| Laser power | ||
| Laser output power | 30 W | 20 W |
| Work area | ||
| Work area | 200 × 200 mm | 410 × 410 mm |
| Work area width (X) | 200 mm | 410 mm |
| Work area depth (Y) | 200 mm | 410 mm |
| Work area (surface) | 400 cm² | 1,681 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | 800 mm/s |
| Precision | ||
| Laser spot size | — | 0.08 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | — | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | 470 mm | 650 mm |
| Depth | 350 mm | 750 mm |
| Height | 610 mm | 222 mm |
| Weight | 23 kg | 12 kg |
| Input voltage | — | 100–240 V |
