- Processing Talk
- Compare
- P3 48W vs K1 Pro Max 70W
Acmer P3 48W vs Ikier K1 Pro Max 70W
What P3 48W does better (3) and where K1 Pro Max 70W wins (5) — every spec side by side.
vs
9.4Power & cutting9.6
9.2Speed9.4
4.4Precision3.8
8.3Safety6.7
5.7Features & ease of use7.9
Why is P3 48W better than K1 Pro Max 70W?
- Laser spot size0.1 mm vs 0.2 mm2×
- Enclosed (fully covered)Yes · K1 Pro Max 70W: No
- Built-in cameraYes · K1 Pro Max 70W: No
Why is K1 Pro Max 70W better than P3 48W?
- Laser output power48 W vs 70 W+46%
- Air assistNo · P3 48W: Yes
- Autofocus / auto heightNo · P3 48W: Yes
- Max engraving / travel speed800 mm/s vs 900 mm/s+12%
- Flame / fire detectionNo · P3 48W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 48 W | 70 W |
| Work area | ||
| Work area | — | 410 × 410 mm |
| Work area width (X) | — | 410 mm |
| Work area depth (Y) | — | 410 mm |
| Work area (surface) | — | 1,681 cm² |
| Conveyor / roll feeder support | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 800 mm/s | 900 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 30 mm |
| Precision | ||
| Laser spot size | 0.1 mm | 0.2 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Flame / fire detection | No | Yes |
| Tilt / movement sensor | — | Yes |
| Exhaust fan | Yes | — |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | — | 780 mm |
| Depth | — | 500 mm |
| Height | — | 153 mm |
| Weight | — | 12 kg |
| Input voltage | — | 100–240 V |
