- Processing Talk
- Compare
- TTC-H40 vs TTC450 Pro
Two Trees TTC-H40 vs Two Trees TTC450 Pro
What TTC-H40 does better (7) and where TTC450 Pro wins (1) — every spec side by side.
vs
9.7Power & cutting3.9
3.0Speed2.2
6.4Precision4.8
8.6Work area7.0
6.5Safety3.1
5.7Features & ease of use5.2
Dimensions
Size comparison
TTC-H40TTC450 Pro
| TTC-H40 | TTC450 Pro | Difference | |
|---|---|---|---|
| Height | 404 mm | 413 mm | −9 mm |
| Width | 1,292 mm | 742 mm | +550 mm |
| Depth | 1,290 mm | 689 mm | +601 mm |
| Weight | 38.3 kg | 15.4 kg | +22.9 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is TTC-H40 better than TTC450 Pro?
- Work area (surface)10,000 cm² vs 2,116 cm²4.7×
- Spindle power3,000 W vs 80 W37.5×
- Max engraving / travel speed30 mm/s vs 13 mm/s2.3×
- Work area width (X)1,000 mm vs 460 mm2.2×
- Work area depth (Y)1,000 mm vs 460 mm2.2×
- Z travel100 mm vs 80 mm+25%
- Linear railsYes · TTC450 Pro: No
Why is TTC450 Pro better than TTC-H40?
- Weight38.3 kg vs 15.4 kg2.5×
Specifications
Side by side
| General | ||
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Frame material | Aluminium | Aluminium |
| Work area | ||
| Work area | 1000 × 1000 mm | 460 × 460 mm |
| Work area width (X) | 1,000 mm | 460 mm |
| Work area depth (Y) | 1,000 mm | 460 mm |
| Work area (surface) | 10,000 cm² | 2,116 cm² |
| Z travel | 100 mm | 80 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 30 mm/s | 13 mm/s |
| Precision | ||
| Positioning accuracy | 0.05 mm | 0.05 mm |
| Closed-loop motors / servos | No | No |
| Linear rails | Yes | No |
| Ball screws | Yes | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Emergency stop button | Yes | — |
| Features | ||
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | Yes | — |
| Laser module option (CNC) | Yes | Yes |
| Automatic tool changer | No | No |
| Tool length / Z probe | No | No |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB |
| Wi-Fi | Yes | — |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Compatible software | Easel, Fusion 360, Vectric VCarve | Easel, Fusion 360, Vectric VCarve |
| LightBurn compatible | — | Yes |
| Controller / firmware | GRBL | GRBL |
| File formats | — | NC, G-code |
| CNC milling | ||
| Spindle power | 3,000 W | 80 W |
| Max spindle speed | 30,000 rpm | 30,000 rpm |
| Size & power | ||
| Width | 1,292 mm | 742 mm |
| Depth | 1,290 mm | 689 mm |
| Height | 404 mm | 413 mm |
| Weight | 38.3 kg | 15.4 kg |
| Rated power consumption | — | 120 W |
