- Processing Talk
- Compare
- S70 Max 70W vs Vision 20W
Sculpfun S70 Max 70W vs WeCreat Vision 20W
What S70 Max 70W does better (7) and where Vision 20W wins (3) — every spec side by side.
vs
9.2Power & cutting6.9
8.0Speed8.0
3.4Precision7.0
9.6Work area5.9
7.2Safety7.9
7.7Features & ease of use8.9
Why is S70 Max 70W better than Vision 20W?
- Laser output power70 W vs 20 W3.5×
- Work area (surface)6,640 cm² vs 1,218 cm²5.5×
- Max cutting depth – wood / plywood (one pass)20 mm vs 10 mm2×
- Air assistYes · Vision 20W: No
- Work area depth (Y)800 mm vs 290 mm2.8×
- Flame / fire detectionYes · Vision 20W: No
- Work area width (X)830 mm vs 420 mm+98%
Why is Vision 20W better than S70 Max 70W?
- Enclosed (fully covered)No · S70 Max 70W: Yes
- Laser spot size0.15 mm vs 0.08 mm+88%
- Built-in cameraNo · S70 Max 70W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 70 W | 20 W |
| Work area | ||
| Work area | 830 × 800 mm | 420 × 290 mm |
| Work area width (X) | 830 mm | 420 mm |
| Work area depth (Y) | 800 mm | 290 mm |
| Work area (surface) | 6,640 cm² | 1,218 cm² |
| Pass-through slot | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | 20 mm | 10 mm |
| Max cutting depth – acrylic | — | 11 mm |
| Precision | ||
| Laser spot size | 0.15 mm | 0.08 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Laser safety class | — | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | Yes | No |
| Emergency stop button | Yes | Yes |
| Tilt / movement sensor | Yes | — |
| Built-in fume filter / purifier | Yes | — |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | Yes |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | Wi-Fi | USB, Wi-Fi |
| Wi-Fi | Yes | Yes |
| USB | — | Yes |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, WeCreat MakeIt |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | — | 589 mm |
| Depth | — | 531 mm |
| Height | — | 253 mm |
