- Processing Talk
- Compare
- S30 5W vs S9 5.5W
Sculpfun S30 5W vs Sculpfun S9 5.5W
What S30 5W does better (2) and where S9 5.5W wins (4) — every spec side by side.
Why is S30 5W better than S9 5.5W?
- Positioning accuracy0.005 mm vs 0.01 mm2×
- Wi-FiYes · S9 5.5W: No
Why is S9 5.5W better than S30 5W?
- Work area (surface)1,463 cm² vs 1,702 cm²+16%
- Laser output power5 W vs 5.5 W+10%
- Work area width (X)380 mm vs 410 mm+8%
- Work area depth (Y)385 mm vs 415 mm+8%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | 450 nm |
| Laser power | ||
| Laser output power | 5 W | 5.5 W |
| Work area | ||
| Work area | 380 × 385 mm | 410 × 415 mm |
| Work area width (X) | 380 mm | 410 mm |
| Work area depth (Y) | 385 mm | 415 mm |
| Work area (surface) | 1,463 cm² | 1,702 cm² |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max cutting depth – wood / plywood (one pass) | — | 15 mm |
| Precision | ||
| Laser spot size | 0.06 mm | — |
| Positioning accuracy | 0.005 mm | 0.01 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Laser shield / filter cover | Yes | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, Bluetooth, SD / USB drive | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| Bluetooth | Yes | — |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Weight | — | 3 kg |
| Rated power consumption | 60 W | — |
