- Processing Talk
- Compare
- H10 10W vs LM2 Pro S2 10W
Ortur H10 10W vs Ortur LM2 Pro S2 10W
What H10 10W does better (2) and where LM2 Pro S2 10W wins (1) — every spec side by side.
vs
6.2Power & cutting5.0
5.3Speed4.8
7.7Work area7.7
6.2Safety7.1
4.8Features & ease of use4.6
Why is H10 10W better than LM2 Pro S2 10W?
- Max engraving / travel speed333 mm/s vs 250 mm/s+33%
- Max cutting depth – acrylic8 mm vs 5 mm+60%
Why is LM2 Pro S2 10W better than H10 10W?
- Flame / fire detectionNo · H10 10W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 450 nm | — |
| Laser power | ||
| Laser output power | 10 W | 10 W |
| Work area | ||
| Work area | 400 × 400 mm | 400 × 400 mm |
| Work area width (X) | 400 mm | 400 mm |
| Work area depth (Y) | 400 mm | 400 mm |
| Work area (surface) | 1,600 cm² | 1,600 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 333 mm/s | 250 mm/s |
| Max cutting depth – wood / plywood (one pass) | 12 mm | 12 mm |
| Max cutting depth – acrylic | 8 mm | 5 mm |
| Precision | ||
| Laser spot size | 0.08 mm | — |
| Positioning accuracy | 0.01 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Emergency stop button | Yes | Yes |
| Tilt / movement sensor | Yes | Yes |
| Built-in fume filter / purifier | Yes | — |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB | USB |
| Wi-Fi | No | No |
| USB | Yes | Yes |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | — | 600 mm |
| Depth | — | 570 mm |
| Height | — | 130 mm |
