- Processing Talk
- Compare
- Pro 2440 80W vs P3 80W
OMTech Pro 2440 80W vs xTool P3 80W
What Pro 2440 80W does better (1) and where P3 80W wins (0) — every spec side by side.
vs
7.8Power & cutting6.6
8.8Work area5.1
4.7Safety4.7
6.6Features & ease of use6.3
Why is Pro 2440 80W better than P3 80W?
- Pass-through slotYes · P3 80W: No
Why is P3 80W better than Pro 2440 80W?
P3 80W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | 80 W | 80 W |
| Work area | ||
| Work area | 600 × 1000 mm | — |
| Work area width (X) | 600 mm | — |
| Work area depth (Y) | 1,000 mm | — |
| Work area (surface) | 6,000 cm² | — |
| Max workpiece height | — | 220 mm |
| Pass-through slot | Yes | No |
| Conveyor / roll feeder support | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 1,200 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | 30 mm | — |
| Max cutting depth – acrylic | 29 mm | — |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Emergency stop button | Yes | Yes |
| Exhaust fan | Yes | — |
| Features | ||
| Air assist | Yes | — |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | — | Yes |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, Ethernet | — |
| Wi-Fi | Yes | — |
| USB | Yes | — |
| Ethernet (LAN) | Yes | — |
| Compatible software | LightBurn, RDWorks | — |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Width | 1,565 mm | — |
| Depth | 1,379 mm | — |
| Height | 1,039 mm | — |
| Weight | 440 kg | — |
| Rated power consumption | 100 W | — |
