- Processing Talk
- Compare
- Pro HD vs Pro 2440 80W
Glowforge Pro HD vs OMTech Pro 2440 80W
What Pro HD does better (1) and where Pro 2440 80W wins (0) — every spec side by side.
vs
8.0Safety4.7
Why is Pro HD better than Pro 2440 80W?
- Built-in cameraYes · Pro 2440 80W: No
Why is Pro 2440 80W better than Pro HD?
Pro 2440 80W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Laser power | ||
| Laser output power | — | 80 W |
| Work area | ||
| Work area | — | 600 × 1000 mm |
| Work area width (X) | — | 600 mm |
| Work area depth (Y) | — | 1,000 mm |
| Work area (surface) | — | 6,000 cm² |
| Max workpiece height | 51 mm | — |
| Pass-through slot | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 1,200 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 30 mm |
| Max cutting depth – acrylic | — | 29 mm |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Emergency stop button | — | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | — | Yes |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | — | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Connections | Wi-Fi | USB, Wi-Fi, Ethernet |
| Wi-Fi | Yes | Yes |
| USB | — | Yes |
| Ethernet (LAN) | — | Yes |
| Compatible software | — | LightBurn, RDWorks |
| LightBurn compatible | — | Yes |
| Size & power | ||
| Width | — | 1,565 mm |
| Depth | — | 1,379 mm |
| Height | — | 1,039 mm |
| Weight | — | 440 kg |
| Rated power consumption | — | 100 W |
