- Processing Talk
- Compare
- Reno Pro 65W vs Polar S 55W
Monport Reno Pro 65W vs OMTech Polar S 55W
What Reno Pro 65W does better (6) and where Polar S 55W wins (2) — every spec side by side.
vs
5.8Power & cutting3.8
7.5Speed8.0
6.5Work area4.2
4.9Safety8.7
6.7Features & ease of use8.8
Dimensions
Size comparison
Reno Pro 65WPolar S 55W
| Reno Pro 65W | Polar S 55W | Difference | |
|---|---|---|---|
| Height | 285 mm | 356 mm | −71 mm |
| Width | 1,000 mm | 1,087 mm | −87 mm |
| Depth | 690 mm | 607 mm | +83 mm |
| Weight | 39.9 kg | 75 kg | −35.1 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Reno Pro 65W better than Polar S 55W?
- Work area (surface)2,816 cm² vs 1,830 cm²+54%
- Laser output power65 W vs 55 W+18%
- Pass-through slotYes · Polar S 55W: No
- Weight39.9 kg vs 75 kg+88%
- Work area depth (Y)440 mm vs 305 mm+44%
- Work area width (X)640 mm vs 600 mm+7%
Why is Polar S 55W better than Reno Pro 65W?
- Built-in cameraNo · Reno Pro 65W: Yes
- Max engraving / travel speed800 mm/s vs 1,000 mm/s+25%
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 10,600 nm | — |
| Laser power | ||
| Laser output power | 65 W | 55 W |
| Work area | ||
| Work area | 640 × 440 mm | 600 × 305 mm |
| Work area width (X) | 640 mm | 600 mm |
| Work area depth (Y) | 440 mm | 305 mm |
| Work area (surface) | 2,816 cm² | 1,830 cm² |
| Pass-through slot | Yes | No |
| Speed & cutting | ||
| Max engraving / travel speed | 800 mm/s | 1,000 mm/s |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Flame / fire detection | — | Yes |
| Emergency stop button | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | Yes |
| Autofocus / auto height | Yes | Yes |
| Offline engraving (no computer) | Yes | — |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB, Wi-Fi, Ethernet, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | — | Yes |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, Inkscape | LightBurn, RDWorks |
| LightBurn compatible | Yes | Yes |
| Controller / firmware | — | Ruida |
| Size & power | ||
| Width | 1,000 mm | 1,087 mm |
| Depth | 690 mm | 607 mm |
| Height | 285 mm | 356 mm |
| Weight | 39.9 kg | 75 kg |
| Rated power consumption | 65 W | — |
| Input voltage | — | 110–120 V |
Related comparisons
vs
xTool X1 Next-GenvsMonport Reno Pro 65W
vs
FLUX Beambox II 55WvsMonport Reno Pro 65W
7.67.7
vs
AtomStack Hurricane 55WvsMonport Reno Pro 65W
6.47.7
vs
Monport Reno65 65WvsOMTech Polar S 55W
5.76.8
vs
Monport Reno Pro&Vision 65WvsOMTech Polar S 55W
5.56.8
vs
OMTech Polar S 55WvsMonport Reno65 Pro 65W
6.88.1