- Processing Talk
- Compare
- Hurricane 55W vs Reno Pro 65W
AtomStack Hurricane 55W vs Monport Reno Pro 65W
What Hurricane 55W does better (1) and where Reno Pro 65W wins (6) — every spec side by side.
vs
5.3Power & cutting5.8
5.4Speed7.5
4.3Work area6.5
8.5Safety4.9
8.8Features & ease of use6.7
Dimensions
Size comparison
Hurricane 55WReno Pro 65W
| Hurricane 55W | Reno Pro 65W | Difference | |
|---|---|---|---|
| Height | 235 mm | 285 mm | −50 mm |
| Width | 1,042 mm | 1,000 mm | +42 mm |
| Depth | 695 mm | 690 mm | +5 mm |
| Weight | 59 kg | 39.9 kg | +19.1 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Hurricane 55W better than Reno Pro 65W?
- Built-in cameraYes · Reno Pro 65W: No
Why is Reno Pro 65W better than Hurricane 55W?
- Work area (surface)1,500 cm² vs 2,816 cm²+88%
- Laser output power55 W vs 65 W+18%
- Max engraving / travel speed600 mm/s vs 800 mm/s+33%
- Weight59 kg vs 39.9 kg+48%
- Work area depth (Y)300 mm vs 440 mm+47%
- Work area width (X)500 mm vs 640 mm+28%
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 10,600 nm | 10,600 nm |
| Laser power | ||
| Laser output power | 55 W | 65 W |
| Work area | ||
| Work area | 500 × 300 mm | 640 × 440 mm |
| Work area width (X) | 500 mm | 640 mm |
| Work area depth (Y) | 300 mm | 440 mm |
| Work area (surface) | 1,500 cm² | 2,816 cm² |
| Pass-through slot | Yes | Yes |
| Conveyor / roll feeder support | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | 600 mm/s | 800 mm/s |
| Max cutting depth – wood / plywood (one pass) | 18 mm | — |
| Max cutting depth – acrylic | 20 mm | — |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Flame / fire detection | Yes | — |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | Yes | — |
| Built-in fume filter / purifier | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, AtomStack Studio | LightBurn, Inkscape |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 1,042 mm | 1,000 mm |
| Depth | 695 mm | 690 mm |
| Height | 235 mm | 285 mm |
| Weight | 59 kg | 39.9 kg |
| Rated power consumption | — | 65 W |
Related comparisons
vs
AtomStack Hurricane 55WvsMonport Effi7 90W
6.46.6
vs
AtomStack Hurricane 55WvsOMTech Pronto 35 60W
6.46.3
vs
AtomStack Hurricane 55WvsMonport Effi7S 90W
6.46.6
vs
AtomStack Hurricane 55WvsGlowforge Plus HD
vs
AtomStack Hurricane 55WvsGlowforge Pro HD
vs
OMTech Polar S 55WvsMonport Reno Pro 65W
6.87.7