- Processing Talk
- Compare
- Reno65 65W vs Polar S 55W
Monport Reno65 65W vs OMTech Polar S 55W
What Reno65 65W does better (6) and where Polar S 55W wins (2) — every spec side by side.
vs
5.9Power & cutting3.8
3.4Speed7.8
6.4Work area4.2
4.8Safety8.6
7.5Features & ease of use8.8
Dimensions
Size comparison
Reno65 65WPolar S 55W
| Reno65 65W | Polar S 55W | Difference | |
|---|---|---|---|
| Height | 285 mm | 356 mm | −71 mm |
| Width | 1,000 mm | 1,087 mm | −87 mm |
| Depth | 690 mm | 607 mm | +83 mm |
| Weight | 39.9 kg | 75 kg | −35.1 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Reno65 65W better than Polar S 55W?
- Work area (surface)2,816 cm² vs 1,830 cm²+54%
- Laser output power65 W vs 55 W+18%
- Pass-through slotYes · Polar S 55W: No
- Weight39.9 kg vs 75 kg+88%
- Work area depth (Y)440 mm vs 305 mm+44%
- Work area width (X)640 mm vs 600 mm+7%
Why is Polar S 55W better than Reno65 65W?
- Max engraving / travel speed500 mm/s vs 1,000 mm/s2×
- Built-in cameraNo · Reno65 65W: Yes
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 10,600 nm | — |
| Laser power | ||
| Laser output power | 65 W | 55 W |
| Work area | ||
| Work area | 640 × 440 mm | 600 × 305 mm |
| Work area width (X) | 640 mm | 600 mm |
| Work area depth (Y) | 440 mm | 305 mm |
| Work area (surface) | 2,816 cm² | 1,830 cm² |
| Pass-through slot | Yes | No |
| Speed & cutting | ||
| Max engraving / travel speed | 500 mm/s | 1,000 mm/s |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Flame / fire detection | — | Yes |
| Emergency stop button | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | Yes |
| Autofocus / auto height | Yes | Yes |
| Water cooling | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB, Wi-Fi, Ethernet, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, RDWorks |
| LightBurn compatible | Yes | Yes |
| Controller / firmware | — | Ruida |
| Size & power | ||
| Width | 1,000 mm | 1,087 mm |
| Depth | 690 mm | 607 mm |
| Height | 285 mm | 356 mm |
| Weight | 39.9 kg | 75 kg |
| Rated power consumption | 65 W | — |
| Input voltage | — | 110–120 V |
Related comparisons
vs
Monport Reno 65WvsMonport Reno65 65W
5.65.8
vs
Monport Reno65 65WvsMonport Reno45 45W
5.84.6
vs
Gweike Cloud Pro II 50WvsMonport Reno65 65W
5.15.8
vs
Gweike Cloud Pro II 55WvsMonport Reno65 65W
5.25.8
vs
xTool X1 Next-GenvsOMTech Polar S 55W
vs
Monport Reno Pro&Vision 65WvsOMTech Polar S 55W
5.66.7