- Processing Talk
- Compare
- Ray5 20W vs Jinsoku LC-60A 5.5W
Longer Ray5 20W vs SainSmart Jinsoku LC-60A 5.5W
What Ray5 20W does better (3) and where Jinsoku LC-60A 5.5W wins (3) — every spec side by side.
vs
8.2Power & cutting3.8
6.1Speed3.5
6.8Work area9.3
4.3Safety6.9
6.2Features & ease of use4.6
Why is Ray5 20W better than Jinsoku LC-60A 5.5W?
- Laser output power20 W vs 5.5 W3.6×
- Max engraving / travel speed400 mm/s vs 167 mm/s2.4×
- Wi-FiYes · Jinsoku LC-60A 5.5W: No
Why is Jinsoku LC-60A 5.5W better than Ray5 20W?
- Work area (surface)1,482 cm² vs 3,600 cm²2.4×
- Work area width (X)385 mm vs 600 mm+56%
- Work area depth (Y)385 mm vs 600 mm+56%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 460 nm | — |
| Laser power | ||
| Laser output power | 20 W | 5.5 W |
| Work area | ||
| Work area | 385 × 385 mm | 600 × 600 mm |
| Work area width (X) | 385 mm | 600 mm |
| Work area depth (Y) | 385 mm | 600 mm |
| Work area (surface) | 1,482 cm² | 3,600 cm² |
| Max workpiece height | — | 135 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 167 mm/s |
| Max cutting depth – wood / plywood (one pass) | 30 mm | — |
| Precision | ||
| Laser spot size | 0.15 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Laser safety class | Class 4 (open beam) | — |
| Flame / fire detection | Yes | Yes |
| Emergency stop button | Yes | Yes |
| Tilt / movement sensor | Yes | — |
| Laser shield / filter cover | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | — |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG, AI | NC, BMP, JPG, PNG, DXF |
| Size & power | ||
| Weight | — | 6 kg |
