- Processing Talk
- Compare
- Ray5 10W vs LM2 Pro S2 5.5W
Longer Ray5 10W vs Ortur LM2 Pro S2 5.5W
What Ray5 10W does better (4) and where LM2 Pro S2 5.5W wins (3) — every spec side by side.
vs
6.8Power & cutting4.2
6.1Speed4.8
6.8Work area7.7
4.3Safety7.1
6.2Features & ease of use4.6
Why is Ray5 10W better than LM2 Pro S2 5.5W?
- Max cutting depth – wood / plywood (one pass)30 mm vs 12 mm2.5×
- Laser output power10 W vs 5.5 W+82%
- Max engraving / travel speed400 mm/s vs 250 mm/s+60%
- Wi-FiYes · LM2 Pro S2 5.5W: No
Why is LM2 Pro S2 5.5W better than Ray5 10W?
- Work area (surface)1,482 cm² vs 1,600 cm²+8%
- Work area width (X)385 mm vs 400 mm+4%
- Work area depth (Y)385 mm vs 400 mm+4%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 460 nm | — |
| Laser power | ||
| Laser output power | 10 W | 5.5 W |
| Work area | ||
| Work area | 385 × 385 mm | 400 × 400 mm |
| Work area width (X) | 385 mm | 400 mm |
| Work area depth (Y) | 385 mm | 400 mm |
| Work area (surface) | 1,482 cm² | 1,600 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 250 mm/s |
| Max cutting depth – wood / plywood (one pass) | 30 mm | 12 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Precision | ||
| Laser spot size | 0.15 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Laser safety class | Class 4 (open beam) | — |
| Flame / fire detection | Yes | Yes |
| Emergency stop button | Yes | Yes |
| Tilt / movement sensor | Yes | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | — |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | USB |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| SD / TF card | Yes | — |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, PNG, BMP, GIF, SVG, AI | — |
| Size & power | ||
| Width | — | 600 mm |
| Depth | — | 570 mm |
| Height | — | 130 mm |
