- Processing Talk
- Compare
- K1 Pro Max 70W vs S70 Max 70W
Ikier K1 Pro Max 70W vs Sculpfun S70 Max 70W
What K1 Pro Max 70W does better (2) and where S70 Max 70W wins (4) — every spec side by side.
vs
9.6Power & cutting9.2
9.4Speed8.0
3.8Precision3.4
8.5Work area9.6
6.7Safety7.2
7.9Features & ease of use7.7
Why is K1 Pro Max 70W better than S70 Max 70W?
- Max engraving / travel speed900 mm/s vs 600 mm/s+50%
- Max cutting depth – wood / plywood (one pass)30 mm vs 20 mm+50%
Why is S70 Max 70W better than K1 Pro Max 70W?
- Work area (surface)1,681 cm² vs 6,640 cm²4×
- Laser spot size0.2 mm vs 0.15 mm+33%
- Work area width (X)410 mm vs 830 mm2×
- Work area depth (Y)410 mm vs 800 mm+95%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 70 W | 70 W |
| Work area | ||
| Work area | 410 × 410 mm | 830 × 800 mm |
| Work area width (X) | 410 mm | 830 mm |
| Work area depth (Y) | 410 mm | 800 mm |
| Work area (surface) | 1,681 cm² | 6,640 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 900 mm/s | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | 30 mm | 20 mm |
| Precision | ||
| Laser spot size | 0.2 mm | 0.15 mm |
| Positioning accuracy | 0.01 mm | — |
| Linear rails | Yes | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | Yes |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | Yes | Yes |
| Built-in fume filter / purifier | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | Wi-Fi |
| Wi-Fi | Yes | Yes |
| USB | Yes | — |
| SD / TF card | Yes | — |
| Phone app control | — | Yes |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | SVG, DXF, JPG, PNG, BMP, TIF | — |
| Size & power | ||
| Width | 780 mm | — |
| Depth | 500 mm | — |
| Height | 153 mm | — |
| Weight | 12 kg | — |
| Input voltage | 100–240 V | — |
