- Processing Talk
- Compare
- X1 40W vs K1 Pro Max 70W
Aliencell X1 40W vs Ikier K1 Pro Max 70W
What X1 40W does better (6) and where K1 Pro Max 70W wins (2) — every spec side by side.
vs
9.0Power & cutting9.6
4.4Precision3.8
9.1Work area8.5
9.8Safety6.7
9.5Features & ease of use7.9
Dimensions
Size comparison
X1 40WK1 Pro Max 70W
| X1 40W | K1 Pro Max 70W | Difference | |
|---|---|---|---|
| Height | 213 mm | 153 mm | +60 mm |
| Width | 903 mm | 780 mm | +123 mm |
| Depth | 787 mm | 500 mm | +287 mm |
| Weight | 35 kg | 12 kg | +23 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is X1 40W better than K1 Pro Max 70W?
- Work area (surface)2,910 cm² vs 1,681 cm²+73%
- Laser spot size0.1 mm vs 0.2 mm2×
- Enclosed (fully covered)Yes · K1 Pro Max 70W: No
- Built-in cameraYes · K1 Pro Max 70W: No
- Work area width (X)610 mm vs 410 mm+49%
- Work area depth (Y)477 mm vs 410 mm+16%
Why is K1 Pro Max 70W better than X1 40W?
- Laser output power40 W vs 70 W+75%
- Weight35 kg vs 12 kg2.9×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | — | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 40 W | 70 W |
| Work area | ||
| Work area | 610 × 477 mm | 410 × 410 mm |
| Work area width (X) | 610 mm | 410 mm |
| Work area depth (Y) | 477 mm | 410 mm |
| Work area (surface) | 2,910 cm² | 1,681 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | — | 900 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 30 mm |
| Precision | ||
| Laser spot size | 0.1 mm | 0.2 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Flame / fire detection | Yes | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, Ethernet | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| Ethernet (LAN) | Yes | — |
| SD / TF card | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | SVG, DXF, JPG, PNG, BMP | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | 903 mm | 780 mm |
| Depth | 787 mm | 500 mm |
| Height | 213 mm | 153 mm |
| Weight | 35 kg | 12 kg |
| Rated power consumption | 350 W | — |
| Input voltage | — | 100–240 V |
