- Processing Talk
- Compare
- G6 MOPA 50W vs Split 50W
Gweike G6 MOPA 50W vs OMTech Split 50W
What G6 MOPA 50W does better (1) and where Split 50W wins (0) — every spec side by side.
vs
5.5Power & cutting5.5
4.9Speed2.4
4.7Safety7.9
5.6Features & ease of use8.2
Why is G6 MOPA 50W better than Split 50W?
- Max engraving / travel speed10,000 mm/s vs 7,000 mm/s+43%
Why is Split 50W better than G6 MOPA 50W?
Split 50W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| MOPA fibre source (adjustable pulse) | Yes | — |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | 50 W | 50 W |
| Work area | ||
| Work area | 110 × 110 mm | — |
| Work area width (X) | 110 mm | — |
| Work area depth (Y) | 110 mm | — |
| Work area (surface) | 121 cm² | — |
| Pass-through slot | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | 7,000 mm/s |
| Precision | ||
| Positioning accuracy | 0.001 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Emergency stop button | — | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Connections | — | USB |
| USB | — | Yes |
| Compatible software | LightBurn, EZCAD2 | EZCAD2 |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Weight | — | 35.4 kg |
| Input voltage | 110–220 V | — |
