- Processing Talk
- Compare
- G6 MOPA 50W vs MOPA Split 30W
Gweike G6 MOPA 50W vs OMTech MOPA Split 30W
What G6 MOPA 50W does better (1) and where MOPA Split 30W wins (0) — every spec side by side.
vs
5.5Power & cutting4.0
4.7Safety4.7
5.6Features & ease of use8.2
Why is G6 MOPA 50W better than MOPA Split 30W?
- Laser output power50 W vs 30 W+67%
Why is MOPA Split 30W better than G6 MOPA 50W?
MOPA Split 30W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| MOPA fibre source (adjustable pulse) | Yes | Yes |
| Wavelength | 1,064 nm | — |
| Laser power | ||
| Laser output power | 50 W | 30 W |
| Work area | ||
| Work area | 110 × 110 mm | — |
| Work area width (X) | 110 mm | — |
| Work area depth (Y) | 110 mm | — |
| Work area (surface) | 121 cm² | — |
| Pass-through slot | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | — |
| Precision | ||
| Positioning accuracy | 0.001 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Compatible software | LightBurn, EZCAD2 | — |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Input voltage | 110–220 V | — |
