- Processing Talk
- Compare
- G2 Max 50W vs Autoforge XPro 30W
Gweike G2 Max 50W vs Monport Autoforge XPro 30W
What G2 Max 50W does better (3) and where Autoforge XPro 30W wins (7) — every spec side by side.
vs
5.5Power & cutting4.0
8.6Speed9.7
8.4Precision5.3
5.1Work area9.2
8.6Safety7.3
2.5Features & ease of use8.6
Dimensions
Size comparison
G2 Max 50WAutoforge XPro 30W
| G2 Max 50W | Autoforge XPro 30W | Difference | |
|---|---|---|---|
| Height | 505 mm | 550 mm | −45 mm |
| Width | 260 mm | 350 mm | −90 mm |
| Depth | 440 mm | 400 mm | +40 mm |
| Weight | 6.5 kg | 18 kg | −11.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is G2 Max 50W better than Autoforge XPro 30W?
- Laser output power50 W vs 30 W+67%
- Enclosed (fully covered)Yes · Autoforge XPro 30W: No
- Weight6.5 kg vs 18 kg2.8×
Why is Autoforge XPro 30W better than G2 Max 50W?
- Work area (surface)225 cm² vs 645 cm²2.9×
- Max engraving / travel speed15,000 mm/s vs 30,000 mm/s2×
- Built-in cameraNo · G2 Max 50W: Yes
- Autofocus / auto heightNo · G2 Max 50W: Yes
- Two laser sourcesNo · G2 Max 50W: Yes
- Work area width (X)150 mm vs 254 mm+69%
- Work area depth (Y)150 mm vs 254 mm+69%
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm), Blue diode (≈455 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | Yes |
| Wavelength | 1,064 nm | 1,064 nm |
| Laser power | ||
| Laser output power | 50 W | 30 W |
| Work area | ||
| Work area | 150 × 150 mm | 254 × 254 mm |
| Work area width (X) | 150 mm | 254 mm |
| Work area depth (Y) | 150 mm | 254 mm |
| Work area (surface) | 225 cm² | 645 cm² |
| Conveyor / roll feeder support | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 15,000 mm/s | 30,000 mm/s |
| Precision | ||
| Laser spot size | — | 0.1 mm |
| Positioning accuracy | 0.001 mm | — |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Emergency stop button | Yes | — |
| Lid interlock | — | Yes |
| Laser shield / filter cover | Yes | — |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | No | Yes |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB, Bluetooth | USB, Wi-Fi |
| Wi-Fi | — | Yes |
| USB | Yes | Yes |
| Bluetooth | Yes | — |
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| Size & power | ||
| Width | 260 mm | 350 mm |
| Depth | 440 mm | 400 mm |
| Height | 505 mm | 550 mm |
| Weight | 6.5 kg | 18 kg |
| Rated power consumption | 120 W | — |
| Input voltage | 110–240 V | — |
Related comparisons
vs
OMTech Solis Duo 30WvsGweike G2 Max 50W
8.88.5
vs
xTool F1 Ultra 20WvsGweike G2 Max 50W
8.68.5
vs
OMTech Solis Duo 20WvsGweike G2 Max 50W
8.38.5
vs
Gweike G3 20WvsGweike G2 Max 50W
8.98.5
vs
Monport Autoforge XPro 30WvsAcmer PM 100W
8.18.0
vs
OMTech Solis Duo 30WvsMonport Autoforge XPro 30W
8.88.1