- Processing Talk
- Compare
- PROVerXL vs TTC-H40
Genmitsu PROVerXL vs Two Trees TTC-H40
What PROVerXL does better (4) and where TTC-H40 wins (5) — every spec side by side.
Dimensions
Size comparison
PROVerXLTTC-H40
| PROVerXL | TTC-H40 | Difference | |
|---|---|---|---|
| Height | 617 mm | 404 mm | +213 mm |
| Width | 1,161 mm | 1,292 mm | −131 mm |
| Depth | 1,142 mm | 1,290 mm | −148 mm |
| Weight | 90 kg | 38.3 kg | +51.7 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is PROVerXL better than TTC-H40?
- Max engraving / travel speed83 mm/s vs 30 mm/s2.8×
- Closed-loop motors / servosYes · TTC-H40: No
- Tool length / Z probeYes · TTC-H40: No
- Z travel113 mm vs 100 mm+13%
Why is TTC-H40 better than PROVerXL?
- Spindle power710 W vs 3,000 W4.2×
- Work area (surface)4,610 cm² vs 10,000 cm²2.2×
- Weight90 kg vs 38.3 kg2.3×
- Work area width (X)679 mm vs 1,000 mm+47%
- Work area depth (Y)679 mm vs 1,000 mm+47%
Specifications
Side by side
| General | ||
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Frame material | Steel | Aluminium |
| Work area | ||
| Work area | 679 × 679 mm | 1000 × 1000 mm |
| Work area width (X) | 679 mm | 1,000 mm |
| Work area depth (Y) | 679 mm | 1,000 mm |
| Work area (surface) | 4,610 cm² | 10,000 cm² |
| Z travel | 113 mm | 100 mm |
| Speed & cutting | ||
| Max engraving / travel speed | 83 mm/s | 30 mm/s |
| Precision | ||
| Positioning accuracy | — | 0.05 mm |
| Closed-loop motors / servos | Yes | No |
| Linear rails | Yes | Yes |
| Ball screws | Yes | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Emergency stop button | Yes | Yes |
| Features | ||
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | Yes | Yes |
| Water cooling | Yes | — |
| Laser module option (CNC) | Yes | Yes |
| Automatic tool changer | No | No |
| Tool length / Z probe | Yes | No |
| Connectivity & software | ||
| Connections | Wi-Fi | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | Yes | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Phone app control | Yes | — |
| Compatible software | Candle, UGS | Easel, Fusion 360, Vectric VCarve |
| Controller / firmware | GRBL | GRBL |
| CNC milling | ||
| Spindle power | 710 W | 3,000 W |
| Max spindle speed | — | 30,000 rpm |
| Size & power | ||
| Width | 1,161 mm | 1,292 mm |
| Depth | 1,142 mm | 1,290 mm |
| Height | 617 mm | 404 mm |
| Weight | 90 kg | 38.3 kg |
| Input voltage | 110–230 V | — |
