- Processing Talk
- Compare
- Cubiko vs K1 Pro Max 48W
Genmitsu Cubiko vs Ikier K1 Pro Max 48W
What Cubiko does better (1) and where K1 Pro Max 48W wins (0) — every spec side by side.
vs
9.5Safety6.7
8.3Features & ease of use7.9
Why is Cubiko better than K1 Pro Max 48W?
- Enclosed (fully covered)Yes · K1 Pro Max 48W: No
Why is K1 Pro Max 48W better than Cubiko?
K1 Pro Max 48W has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | — | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | — | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | — | 48 W |
| Work area | ||
| Work area | — | 410 × 410 mm |
| Work area width (X) | — | 410 mm |
| Work area depth (Y) | — | 410 mm |
| Work area (surface) | — | 1,681 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | — | 900 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 30 mm |
| Precision | ||
| Laser spot size | — | 0.2 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Flame / fire detection | — | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | — | No |
| Autofocus / auto height | — | Yes |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Laser module option (CNC) | Yes | — |
| Tool length / Z probe | Yes | — |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Phone app control | Yes | — |
| Compatible software | — | LightBurn, LaserGRBL |
| LightBurn compatible | — | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | — | 780 mm |
| Depth | — | 500 mm |
| Height | — | 153 mm |
| Weight | — | 12 kg |
| Input voltage | — | 100–240 V |
