- Processing Talk
- Compare
- K1 Pro Max 48W vs TTS-20 Max
Ikier K1 Pro Max 48W vs Two Trees TTS-20 Max
What K1 Pro Max 48W does better (1) and where TTS-20 Max wins (0) — every spec side by side.
vs
9.4Speed6.9
Why is K1 Pro Max 48W better than TTS-20 Max?
- Max engraving / travel speed900 mm/s vs 500 mm/s+80%
Why is TTS-20 Max better than K1 Pro Max 48W?
TTS-20 Max has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 48 W | — |
| Work area | ||
| Work area | 410 × 410 mm | — |
| Work area width (X) | 410 mm | — |
| Work area depth (Y) | 410 mm | — |
| Work area (surface) | 1,681 cm² | — |
| Speed & cutting | ||
| Max engraving / travel speed | 900 mm/s | 500 mm/s |
| Max cutting depth – wood / plywood (one pass) | 30 mm | — |
| Precision | ||
| Laser spot size | 0.2 mm | — |
| Positioning accuracy | 0.01 mm | — |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | — |
| Flame / fire detection | Yes | — |
| Tilt / movement sensor | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | — |
| Autofocus / auto height | Yes | — |
| Rotary attachment support | Yes | — |
| Touchscreen / control panel | Yes | — |
| Offline engraving (no computer) | Yes | — |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | — |
| Wi-Fi | Yes | — |
| USB | Yes | — |
| SD / TF card | Yes | — |
| Compatible software | LightBurn, LaserGRBL | — |
| LightBurn compatible | Yes | — |
| File formats | SVG, DXF, JPG, PNG, BMP, TIF | — |
| Size & power | ||
| Width | 780 mm | — |
| Depth | 500 mm | — |
| Height | 153 mm | — |
| Weight | 12 kg | — |
| Input voltage | 100–240 V | — |
