- Processing Talk
- Compare
- Beambox Pro 50W vs Maker AF2028-60 60W
FLUX Beambox Pro 50W vs OMTech Maker AF2028-60 60W
What Beambox Pro 50W does better (3) and where Maker AF2028-60 60W wins (4) — every spec side by side.
vs
3.4Power & cutting4.9
2.8Speed5.8
4.8Work area5.6
4.7Safety4.7
9.5Features & ease of use4.1
Dimensions
Size comparison
Beambox Pro 50WMaker AF2028-60 60W
| Beambox Pro 50W | Maker AF2028-60 60W | Difference | |
|---|---|---|---|
| Height | 670 mm | 930 mm | −260 mm |
| Width | 250 mm | 1,199 mm | −949 mm |
| Depth | 1,030 mm | 871 mm | +159 mm |
| Weight | 55 kg | 112.9 kg | −57.9 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Beambox Pro 50W better than Maker AF2028-60 60W?
- Built-in cameraYes · Maker AF2028-60 60W: No
- Weight55 kg vs 112.9 kg2.1×
- Wi-FiYes · Maker AF2028-60 60W: No
Why is Maker AF2028-60 60W better than Beambox Pro 50W?
- Max engraving / travel speed305 mm/s vs 600 mm/s+97%
- Laser output power50 W vs 60 W+20%
- Work area (surface)2,250 cm² vs 2,477 cm²+10%
- Work area depth (Y)375 mm vs 406 mm+8%
Specifications
Side by side
| General | ||
| Laser sources | CO2 (10.6 µm) | CO2 (10.6 µm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | — | No |
| Laser power | ||
| Laser output power | 50 W | 60 W |
| Work area | ||
| Work area | 600 × 375 mm | 610 × 406 mm |
| Work area width (X) | 600 mm | 610 mm |
| Work area depth (Y) | 375 mm | 406 mm |
| Work area (surface) | 2,250 cm² | 2,477 cm² |
| Pass-through slot | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | 305 mm/s | 600 mm/s |
| Precision | ||
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | Yes |
| Exhaust fan | — | Yes |
| Features | ||
| Air assist | — | Yes |
| Built-in camera | Yes | No |
| Autofocus / auto height | — | No |
| Rotary attachment support | — | Yes |
| Touchscreen / control panel | Yes | Yes |
| Water cooling | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, Ethernet | USB, Ethernet |
| Wi-Fi | Yes | No |
| USB | Yes | Yes |
| Ethernet (LAN) | Yes | Yes |
| Compatible software | Beam Studio | RDWorks |
| File formats | JPG, PNG, SVG, DXF | AI, BMP, DXF, GIF, HPGL, JPG, PDF, PLT, PNG, SVG, TIFF |
| Size & power | ||
| Width | 250 mm | 1,199 mm |
| Depth | 1,030 mm | 871 mm |
| Height | 670 mm | 930 mm |
| Weight | 55 kg | 112.9 kg |
| Rated power consumption | — | 60 W |
