- Processing Talk
- Compare
- PHECDA 10W vs K1 Pro 24W
Elegoo PHECDA 10W vs Ikier K1 Pro 24W
What PHECDA 10W does better (2) and where K1 Pro 24W wins (7) — every spec side by side.
vs
4.8Power & cutting8.4
6.6Speed9.2
8.7Precision6.8
7.7Work area8.5
5.8Safety6.7
6.4Features & ease of use7.9
Dimensions
Size comparison
PHECDA 10WK1 Pro 24W
| PHECDA 10W | K1 Pro 24W | Difference | |
|---|---|---|---|
| Height | 190 mm | 222 mm | −32 mm |
| Width | 673 mm | 650 mm | +23 mm |
| Depth | 660 mm | 750 mm | −90 mm |
| Weight | 6.5 kg | 12 kg | −5.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is PHECDA 10W better than K1 Pro 24W?
- Laser spot size0.06 mm vs 0.08 mm+33%
- Weight6.5 kg vs 12 kg+85%
Why is K1 Pro 24W better than PHECDA 10W?
- Laser output power10 W vs 24 W2.4×
- Max engraving / travel speed417 mm/s vs 800 mm/s+92%
- Autofocus / auto heightNo · PHECDA 10W: Yes
- Work area (surface)1,600 cm² vs 1,681 cm²+5%
- Flame / fire detectionNo · PHECDA 10W: Yes
- Work area width (X)400 mm vs 410 mm+2%
- Work area depth (Y)400 mm vs 410 mm+2%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 10 W | 24 W |
| Work area | ||
| Work area | 400 × 400 mm | 410 × 410 mm |
| Work area width (X) | 400 mm | 410 mm |
| Work area depth (Y) | 400 mm | 410 mm |
| Work area (surface) | 1,600 cm² | 1,681 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 417 mm/s | 800 mm/s |
| Max cutting depth – wood / plywood (one pass) | 8 mm | — |
| Precision | ||
| Laser spot size | 0.06 mm | 0.08 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Tilt / movement sensor | Yes | Yes |
| Built-in fume filter / purifier | Yes | — |
| Exhaust fan | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | Yes | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB, SD / USB drive | USB |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | Yes | Yes |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | SVG, DXF, JPG, PNG, BMP, TIF | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | 673 mm | 650 mm |
| Depth | 660 mm | 750 mm |
| Height | 190 mm | 222 mm |
| Weight | 6.5 kg | 12 kg |
| Rated power consumption | 55 W | — |
| Input voltage | — | 100–240 V |
