- Processing Talk
- Compare
- X12 Pro vs C2 14W
AtomStack X12 Pro vs Sculpfun C2 14W
What X12 Pro does better (2) and where C2 14W wins (3) — every spec side by side.
Why is X12 Pro better than C2 14W?
- Work area (surface)1,113 cm² vs 900 cm²+24%
- Work area width (X)365 mm vs 300 mm+22%
Why is C2 14W better than X12 Pro?
- Laser spot size0.06 mm vs 0.04 mm+50%
- Air assistNo · X12 Pro: Yes
- Laser output power12 W vs 14 W+17%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 12 W | 14 W |
| Work area | ||
| Work area | 365 × 305 mm | 300 × 300 mm |
| Work area width (X) | 365 mm | 300 mm |
| Work area depth (Y) | 305 mm | 300 mm |
| Work area (surface) | 1,113 cm² | 900 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | — | 333 mm/s |
| Max cutting depth – wood / plywood (one pass) | — | 8 mm |
| Max cutting depth – acrylic | — | 5 mm |
| Precision | ||
| Laser spot size | 0.06 mm | 0.04 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Emergency stop button | — | Yes |
| Tilt / movement sensor | Yes | — |
| Laser shield / filter cover | Yes | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | — | Yes |
| Connectivity & software | ||
| Connections | USB | USB |
| Wi-Fi | No | No |
| USB | Yes | Yes |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, SVG, PNG, BMP, PDF, G-code, DXF | — |
| Size & power | ||
| Width | — | 456 mm |
| Depth | — | 442 mm |
| Height | — | 143 mm |
| Weight | — | 1.6 kg |
| Rated power consumption | 50 W | — |
| Input voltage | 100–240 V | — |
