- Processing Talk
- Compare
- A24 Pro vs K1 Pro Max 48W
AtomStack A24 Pro vs Ikier K1 Pro Max 48W
What A24 Pro does better (1) and where K1 Pro Max 48W wins (9) — every spec side by side.
vs
8.1Power & cutting9.3
5.7Work area8.5
7.7Safety6.7
3.1Features & ease of use7.9
Why is A24 Pro better than K1 Pro Max 48W?
- Enclosed (fully covered)Yes · K1 Pro Max 48W: No
Why is K1 Pro Max 48W better than A24 Pro?
- Laser output power24 W vs 48 W2×
- Work area (surface)1,008 cm² vs 1,681 cm²+67%
- Max cutting depth – wood / plywood (one pass)17 mm vs 30 mm+76%
- Air assistNo · A24 Pro: Yes
- Autofocus / auto heightNo · A24 Pro: Yes
- Flame / fire detectionNo · A24 Pro: Yes
- Work area depth (Y)280 mm vs 410 mm+46%
- Weight16 kg vs 12 kg+33%
- Work area width (X)360 mm vs 410 mm+14%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 24 W | 48 W |
| Work area | ||
| Work area | 360 × 280 mm | 410 × 410 mm |
| Work area width (X) | 360 mm | 410 mm |
| Work area depth (Y) | 280 mm | 410 mm |
| Work area (surface) | 1,008 cm² | 1,681 cm² |
| Conveyor / roll feeder support | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | — | 900 mm/s |
| Max cutting depth – wood / plywood (one pass) | 17 mm | 30 mm |
| Max cutting depth – acrylic | 15 mm | — |
| Precision | ||
| Laser spot size | — | 0.2 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Laser safety class | Class 1 (eye-safe, enclosed) | — |
| Flame / fire detection | No | Yes |
| Tilt / movement sensor | Yes | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | — | LightBurn, LaserGRBL |
| LightBurn compatible | — | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | — | 780 mm |
| Depth | — | 500 mm |
| Height | — | 153 mm |
| Weight | 16 kg | 12 kg |
| Input voltage | — | 100–240 V |
