- Processing Talk
- Compare
- A10 Pro V2 vs K1 Pro 24W
AtomStack A10 Pro V2 vs Ikier K1 Pro 24W
What A10 Pro V2 does better (1) and where K1 Pro 24W wins (7) — every spec side by side.
vs
6.3Power & cutting8.4
6.1Speed9.2
5.5Precision6.8
7.1Work area8.5
6.4Safety6.7
4.0Features & ease of use7.9
Dimensions
Size comparison
A10 Pro V2K1 Pro 24W
| A10 Pro V2 | K1 Pro 24W | Difference | |
|---|---|---|---|
| Height | 178 mm | 222 mm | −44 mm |
| Width | 178 mm | 650 mm | −472 mm |
| Depth | 254 mm | 750 mm | −496 mm |
| Weight | 6 kg | 12 kg | −6 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is A10 Pro V2 better than K1 Pro 24W?
- Weight6 kg vs 12 kg2×
Why is K1 Pro 24W better than A10 Pro V2?
- Laser output power10 W vs 24 W2.4×
- Max engraving / travel speed400 mm/s vs 800 mm/s2×
- Positioning accuracy0.02 mm vs 0.01 mm2×
- Air assistNo · A10 Pro V2: Yes
- Autofocus / auto heightNo · A10 Pro V2: Yes
- Work area (surface)1,558 cm² vs 1,681 cm²+8%
- Work area depth (Y)380 mm vs 410 mm+8%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 10 W | 24 W |
| Work area | ||
| Work area | 410 × 380 mm | 410 × 410 mm |
| Work area width (X) | 410 mm | 410 mm |
| Work area depth (Y) | 380 mm | 410 mm |
| Work area (surface) | 1,558 cm² | 1,681 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 800 mm/s |
| Max cutting depth – wood / plywood (one pass) | 12 mm | — |
| Max cutting depth – acrylic | 10 mm | — |
| Precision | ||
| Laser spot size | 0.08 mm | 0.08 mm |
| Positioning accuracy | 0.02 mm | 0.01 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | Yes | Yes |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | — | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | USB |
| Wi-Fi | Yes | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | JPG, SVG, PNG, BMP, PDF, G-code, DXF | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | 178 mm | 650 mm |
| Depth | 254 mm | 750 mm |
| Height | 178 mm | 222 mm |
| Weight | 6 kg | 12 kg |
| Rated power consumption | 50 W | — |
| Input voltage | — | 100–240 V |
