- Processing Talk
- Compare
- A10 Pro V2 vs AL3 5W
AtomStack A10 Pro V2 vs Aufero AL3 5W
What A10 Pro V2 does better (1) and where AL3 5W wins (1) — every spec side by side.
vs
6.4Power & cutting3.3
Why is A10 Pro V2 better than AL3 5W?
- Laser output power10 W vs 5 W2×
Why is AL3 5W better than A10 Pro V2?
- Air assistNo · A10 Pro V2: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | 455 nm | — |
| Laser power | ||
| Laser output power | 10 W | 5 W |
| Work area | ||
| Work area | 410 × 380 mm | — |
| Work area width (X) | 410 mm | — |
| Work area depth (Y) | 380 mm | — |
| Work area (surface) | 1,558 cm² | — |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | — |
| Max cutting depth – wood / plywood (one pass) | 12 mm | — |
| Max cutting depth – acrylic | 10 mm | — |
| Precision | ||
| Laser spot size | 0.08 mm | — |
| Positioning accuracy | 0.02 mm | — |
| Safety | ||
| Enclosed (fully covered) | No | — |
| Flame / fire detection | Yes | — |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | — |
| Autofocus / auto height | No | — |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB, Wi-Fi | — |
| Wi-Fi | Yes | — |
| USB | Yes | — |
| Compatible software | LightBurn, LaserGRBL, AtomStack Studio | — |
| LightBurn compatible | Yes | — |
| File formats | JPG, SVG, PNG, BMP, PDF, G-code, DXF | — |
| Size & power | ||
| Width | 178 mm | — |
| Depth | 254 mm | — |
| Height | 178 mm | — |
| Weight | 6 kg | — |
| Rated power consumption | 50 W | — |
Related comparisons
vs
AtomStack A10 Pro V2vsAlgolaser Extended 10W
7.07.0
vs
AtomStack A10 Pro V2vsAlgolaser MK2 10W
7.06.5
vs
AtomStack A10 Pro V2vsAlgolaser T150 6W
7.05.7
vs
AtomStack A10 Pro V2vsAlgolaser T150 10W
7.06.5
vs
AtomStack A10 Pro V2vsSculpfun S9 Pro 10W
7.09.0
vs
AtomStack A10 Pro V2vsAcmer S2 12W
7.06.1


