- Processing Talk
- Compare
- S2 Pro 36W vs R1 1.3W
Acmer S2 Pro 36W vs Ortur R1 1.3W
What S2 Pro 36W does better (7) and where R1 1.3W wins (1) — every spec side by side.
vs
8.6Power & cutting2.0
6.2Speed2.2
5.0Precision3.2
7.8Work area2.3
3.2Safety7.7
5.7Features & ease of use2.2
Why is S2 Pro 36W better than R1 1.3W?
- Laser output power36 W vs 1.3 W27.7×
- Work area (surface)1,600 cm² vs 100 cm²16×
- Max engraving / travel speed400 mm/s vs 83 mm/s4.8×
- Air assistYes · R1 1.3W: No
- Work area width (X)400 mm vs 100 mm4×
- Work area depth (Y)400 mm vs 100 mm4×
- Laser spot size0.1 mm vs 0.11 mm+10%
Why is R1 1.3W better than S2 Pro 36W?
- Enclosed (fully covered)No · S2 Pro 36W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm), Infrared diode (1064 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 450 nm |
| Laser power | ||
| Laser output power | 36 W | 1.3 W |
| Work area | ||
| Work area | 400 × 400 mm | 100 × 100 mm |
| Work area width (X) | 400 mm | 100 mm |
| Work area depth (Y) | 400 mm | 100 mm |
| Work area (surface) | 1,600 cm² | 100 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 400 mm/s | 83 mm/s |
| Precision | ||
| Laser spot size | 0.1 mm | 0.11 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Laser safety class | — | Class 1 (eye-safe, enclosed) |
| Flame / fire detection | No | No |
| Tilt / movement sensor | — | Yes |
| Features | ||
| Air assist | Yes | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | — |
| Connectivity & software | ||
| Connections | — | USB |
| Wi-Fi | — | No |
| USB | — | Yes |
| Phone app control | — | Yes |
| Compatible software | LightBurn | — |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Width | — | 272 mm |
| Depth | — | 250 mm |
| Height | — | 140 mm |
| Weight | — | 2.4 kg |
