- Processing Talk
- Compare
- GE1 10W vs S2 Pro 36W
Acmer GE1 10W vs Acmer S2 Pro 36W
What GE1 10W does better (3) and where S2 Pro 36W wins (5) — every spec side by side.
vs
4.8Power & cutting8.6
2.5Work area7.8
8.7Safety3.2
5.7Features & ease of use5.7
Why is GE1 10W better than S2 Pro 36W?
- Enclosed (fully covered)Yes · S2 Pro 36W: No
- Autofocus / auto heightYes · S2 Pro 36W: No
- Two laser sourcesYes · S2 Pro 36W: No
Why is S2 Pro 36W better than GE1 10W?
- Laser output power10 W vs 36 W3.6×
- Work area (surface)110 cm² vs 1,600 cm²14.5×
- Air assistNo · GE1 10W: Yes
- Work area width (X)105 mm vs 400 mm3.8×
- Work area depth (Y)105 mm vs 400 mm3.8×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm), Infrared diode (1064 nm) | Blue diode (≈455 nm) |
| Motion system | Galvo (scanning mirrors) | Gantry (XY rails) |
| Two laser sources | Yes | No |
| Laser power | ||
| Laser output power | 10 W | 36 W |
| Second laser output power | 2 W | — |
| Work area | ||
| Work area | 105 × 105 mm | 400 × 400 mm |
| Work area width (X) | 105 mm | 400 mm |
| Work area depth (Y) | 105 mm | 400 mm |
| Work area (surface) | 110 cm² | 1,600 cm² |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | — | 400 mm/s |
| Max cutting depth – wood / plywood (one pass) | 8 mm | — |
| Precision | ||
| Laser spot size | — | 0.1 mm |
| Linear rails | — | Yes |
| Safety | ||
| Enclosed (fully covered) | Yes | No |
| Flame / fire detection | No | No |
| Emergency stop button | Yes | — |
| Features | ||
| Air assist | No | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | Yes | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
