- Processing Talk
- Compare
- PM 50W vs GA MOPA 60W
Acmer PM 50W vs Monport GA MOPA 60W
What PM 50W does better (3) and where GA MOPA 60W wins (2) — every spec side by side.
vs
5.6Power & cutting7.2
5.0Speed5.0
7.6Work area6.7
4.7Safety4.7
6.2Features & ease of use6.2
Dimensions
Size comparison
PM 50WGA MOPA 60W
| PM 50W | GA MOPA 60W | Difference | |
|---|---|---|---|
| Height | 610 mm | 620 mm | −10 mm |
| Width | 470 mm | 400 mm | +70 mm |
| Depth | 350 mm | 330 mm | +20 mm |
| Weight | 23 kg | 16.6 kg | +6.4 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is PM 50W better than GA MOPA 60W?
- Work area (surface)400 cm² vs 306 cm²+31%
- Work area width (X)200 mm vs 175 mm+14%
- Work area depth (Y)200 mm vs 175 mm+14%
Why is GA MOPA 60W better than PM 50W?
- Laser output power50 W vs 60 W+20%
- Weight23 kg vs 16.6 kg+39%
Specifications
Side by side
| General | ||
| Laser sources | Fibre (1064 nm) | Fibre (1064 nm) |
| Motion system | Galvo (scanning mirrors) | Galvo (scanning mirrors) |
| Two laser sources | No | No |
| MOPA fibre source (adjustable pulse) | Yes | Yes |
| Wavelength | — | 1,064 nm |
| Laser power | ||
| Laser output power | 50 W | 60 W |
| Work area | ||
| Work area | 200 × 200 mm | 175 × 175 mm |
| Work area width (X) | 200 mm | 175 mm |
| Work area depth (Y) | 200 mm | 175 mm |
| Work area (surface) | 400 cm² | 306 cm² |
| Speed & cutting | ||
| Max engraving / travel speed | 10,000 mm/s | 10,000 mm/s |
| Precision | ||
| Positioning accuracy | — | 0.01 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Features | ||
| Built-in camera | No | No |
| Autofocus / auto height | Yes | Yes |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Compatible software | LightBurn | LightBurn |
| LightBurn compatible | Yes | Yes |
| File formats | — | BMP, GIF, JPG, DXF, DST |
| Size & power | ||
| Width | 470 mm | 400 mm |
| Depth | 350 mm | 330 mm |
| Height | 610 mm | 620 mm |
| Weight | 23 kg | 16.6 kg |









