- Processing Talk
- Compare
- P2 10W vs K1 12W
Acmer P2 10W vs Ikier K1 12W
What P2 10W does better (3) and where K1 12W wins (3) — every spec side by side.
Why is P2 10W better than K1 12W?
- Work area (surface)3,360 cm² vs 1,681 cm²+100%
- Work area depth (Y)800 mm vs 410 mm+95%
- Work area width (X)420 mm vs 410 mm+2%
Why is K1 12W better than P2 10W?
- Autofocus / auto heightNo · P2 10W: Yes
- Laser output power10 W vs 12 W+20%
- Flame / fire detectionNo · P2 10W: Yes
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 10 W | 12 W |
| Work area | ||
| Work area | 420 × 800 mm | 410 × 410 mm |
| Work area width (X) | 420 mm | 410 mm |
| Work area depth (Y) | 800 mm | 410 mm |
| Work area (surface) | 3,360 cm² | 1,681 cm² |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | — | 800 mm/s |
| Max cutting depth – wood / plywood (one pass) | 30 mm | — |
| Precision | ||
| Laser spot size | — | 0.06 mm |
| Positioning accuracy | — | 0.01 mm |
| Linear rails | Yes | — |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | Yes |
| Emergency stop button | Yes | — |
| Tilt / movement sensor | Yes | — |
| Features | ||
| Air assist | Yes | Yes |
| Built-in camera | No | No |
| Autofocus / auto height | No | Yes |
| Connectivity & software | ||
| Connections | — | USB, Wi-Fi, SD / USB drive |
| Wi-Fi | — | Yes |
| USB | — | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn | LightBurn, LaserGRBL |
| LightBurn compatible | Yes | Yes |
| File formats | — | SVG, DXF, JPG, PNG, BMP, TIF |
| Size & power | ||
| Width | — | 650 mm |
| Depth | — | 750 mm |
| Height | — | 222 mm |
| Weight | — | 12 kg |
| Input voltage | — | 100–240 V |
