- Processing Talk
- Compare
- TS2 20W vs TTC450 Ultra
Two Trees TS2 20W vs Two Trees TTC450 Ultra
What TS2 20W does better (0) and where TTC450 Ultra wins (4) — every spec side by side.
vs
7.7Power & cutting6.8
2.1Precision5.0
8.5Work area7.4
3.2Safety6.5
7.9Features & ease of use4.7
Why is TS2 20W better than TTC450 Ultra?
TS2 20W has no measurable advantages in this pair.
Why is TTC450 Ultra better than TS2 20W?
- Positioning accuracy0.21 mm vs 0.05 mm4.2×
- Work area (surface)1,681 cm² vs 2,116 cm²+26%
- Work area width (X)410 mm vs 460 mm+12%
- Work area depth (Y)410 mm vs 460 mm+12%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | — |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | — |
| Frame material | — | Aluminium |
| Laser power | ||
| Laser output power | 20 W | — |
| Work area | ||
| Work area | 410 × 410 mm | 460 × 460 mm |
| Work area width (X) | 410 mm | 460 mm |
| Work area depth (Y) | 410 mm | 460 mm |
| Work area (surface) | 1,681 cm² | 2,116 cm² |
| Z travel | — | 100 mm |
| Work-area extension kit | Yes | — |
| Speed & cutting | ||
| Max engraving / travel speed | — | 50 mm/s |
| Precision | ||
| Positioning accuracy | 0.21 mm | 0.05 mm |
| Closed-loop motors / servos | — | No |
| Linear rails | — | Yes |
| Ball screws | — | No |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | — |
| Emergency stop button | — | Yes |
| Features | ||
| Air assist | Yes | — |
| Built-in camera | No | — |
| Autofocus / auto height | Yes | — |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Offline engraving (no computer) | Yes | — |
| Laser module option (CNC) | — | Yes |
| Automatic tool changer | — | No |
| Tool length / Z probe | — | No |
| Connectivity & software | ||
| Connections | USB, Wi-Fi, SD / USB drive | SD / USB drive |
| Wi-Fi | Yes | — |
| USB | Yes | — |
| SD / TF card | Yes | Yes |
| Phone app control | Yes | — |
| Compatible software | LightBurn, LaserGRBL | Easel, Fusion 360, Vectric VCarve |
| LightBurn compatible | Yes | — |
| Controller / firmware | — | GRBL |
| File formats | — | NC, G-code |
| CNC milling | ||
| Spindle power | — | 500 W |
| Max spindle speed | — | 30,000 rpm |
| Size & power | ||
| Width | — | 745 mm |
| Depth | — | 660 mm |
| Height | — | 473 mm |
| Weight | — | 19 kg |
| Rated power consumption | — | 80 W |
