- Processing Talk
- Compare
- C1 Mini 3W vs ED1
Sculpfun C1 Mini 3W vs Two Trees ED1
What C1 Mini 3W does better (1) and where ED1 wins (6) — every spec side by side.
vs
2.5Power & cutting6.5
9.4Precision9.5
3.5Work area5.4
3.2Safety8.9
2.7Features & ease of use9.7
Dimensions
Size comparison
C1 Mini 3WED1
| C1 Mini 3W | ED1 | Difference | |
|---|---|---|---|
| Height | 140 mm | 525 mm | −385 mm |
| Width | 290 mm | 630 mm | −340 mm |
| Depth | 250 mm | 510 mm | −260 mm |
| Weight | 1.1 kg | 38 kg | −36.9 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is C1 Mini 3W better than ED1?
- Weight1.1 kg vs 38 kg34.5×
Why is ED1 better than C1 Mini 3W?
- Work area (surface)195 cm² vs 600 cm²3.1×
- Enclosed (fully covered)No · C1 Mini 3W: Yes
- Built-in cameraNo · C1 Mini 3W: Yes
- Work area width (X)150 mm vs 300 mm2×
- Wi-FiNo · C1 Mini 3W: Yes
- Work area depth (Y)130 mm vs 200 mm+54%
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | — |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | — |
| Frame material | — | Aluminium |
| Laser power | ||
| Laser output power | 3 W | — |
| Work area | ||
| Work area | 150 × 130 mm | 300 × 200 mm |
| Work area width (X) | 150 mm | 300 mm |
| Work area depth (Y) | 130 mm | 200 mm |
| Work area (surface) | 195 cm² | 600 cm² |
| Z travel | — | 120 mm |
| Speed & cutting | ||
| Max engraving / travel speed | — | 50 mm/s |
| Precision | ||
| Laser spot size | 0.04 mm | — |
| Positioning accuracy | — | 0.01 mm |
| Closed-loop motors / servos | — | No |
| Linear rails | — | Yes |
| Ball screws | — | Yes |
| Safety | ||
| Enclosed (fully covered) | No | Yes |
| Flame / fire detection | No | — |
| Lid interlock | — | Yes |
| Features | ||
| Air assist | No | — |
| Built-in camera | No | Yes |
| Autofocus / auto height | No | — |
| Rotary attachment support | Yes | Yes |
| Touchscreen / control panel | — | Yes |
| Laser module option (CNC) | — | Yes |
| Automatic tool changer | — | Yes |
| Tool length / Z probe | — | Yes |
| Connectivity & software | ||
| Connections | USB | Wi-Fi |
| Wi-Fi | No | Yes |
| USB | Yes | Yes |
| SD / TF card | — | Yes |
| Compatible software | LightBurn, LaserGRBL | Easel, Fusion 360 |
| LightBurn compatible | Yes | — |
| Controller / firmware | — | GRBL |
| File formats | — | NC, G-code |
| CNC milling | ||
| Spindle power | — | 600 W |
| Max spindle speed | — | 18,000 rpm |
| Size & power | ||
| Width | 290 mm | 630 mm |
| Depth | 250 mm | 510 mm |
| Height | 140 mm | 525 mm |
| Weight | 1.1 kg | 38 kg |
| Rated power consumption | — | 240 W |
| Input voltage | — | 200–240 V |
