- Processing Talk
- Compare
- LM2 S2 1.6W vs Z3
Ortur LM2 S2 1.6W vs Wainlux Z3
What LM2 S2 1.6W does better (0) and where Z3 wins (1) — every spec side by side.
vs
3.5Power & cutting2.9
4.9Safety3.2
2.7Features & ease of use3.1
Why is LM2 S2 1.6W better than Z3?
LM2 S2 1.6W has no measurable advantages in this pair.
Why is Z3 better than LM2 S2 1.6W?
- Laser output power1.6 W vs 4.5 W2.8×
Specifications
Side by side
| General | ||
| Laser sources | Blue diode (≈455 nm) | Blue diode (≈455 nm) |
| Motion system | Gantry (XY rails) | Gantry (XY rails) |
| Two laser sources | No | No |
| Wavelength | — | 455 nm |
| Laser power | ||
| Laser output power | 1.6 W | 4.5 W |
| Work area | ||
| Work area | — | 80 × 80 mm |
| Work area width (X) | — | 80 mm |
| Work area depth (Y) | — | 80 mm |
| Work area (surface) | — | 64 cm² |
| Work-area extension kit | — | Yes |
| Speed & cutting | ||
| Max engraving / travel speed | — | 600 mm/s |
| Max cutting depth – wood / plywood (one pass) | 12 mm | — |
| Max cutting depth – acrylic | 5 mm | — |
| Precision | ||
| Positioning accuracy | — | 0.05 mm |
| Safety | ||
| Enclosed (fully covered) | No | No |
| Flame / fire detection | No | No |
| Tilt / movement sensor | Yes | — |
| Features | ||
| Air assist | No | No |
| Built-in camera | No | No |
| Autofocus / auto height | No | No |
| Rotary attachment support | Yes | Yes |
| Connectivity & software | ||
| Connections | USB | SD / USB drive |
| Wi-Fi | No | — |
| USB | Yes | — |
| SD / TF card | — | Yes |
| Compatible software | LightBurn | — |
| LightBurn compatible | Yes | — |
| Size & power | ||
| Width | — | 220 mm |
| Depth | — | 130 mm |
| Height | — | 220 mm |
| Weight | — | 2.4 kg |
